R60/R61 Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for R60 AND R61 MINI Cooper and Cooper S MINIs.

Driver's Side window problem

Thread Tools
 
Search this Thread
 
Old Jun 28, 2012 | 05:43 PM
  #1  
Shoof's Avatar
Shoof
Thread Starter
|
5th Gear
iTrader: (1)
Joined: Jun 2009
Posts: 652
Likes: 7
From: LI, NY
Driver's Side window problem

Just got my car last week. I have all of 275 miles on it. Car was in my garage with the driver's side window down. I pull out of the garage and close the driver's side window, push up the window switch/lever, the window goes up an inch and stops. push the lever up again, it goes another inch, and stops. And so on. I had to push the lever up like 10 times to get the window to fully close. Then I tried to open the window, and the same thing. every tap of the lever, the window drops an inch. So to open or close the driver's side window, I have to tap the switch at least 10 times to get the window all the way up or down...

Anyone else having this problem?!?
 
Reply
Old Jun 28, 2012 | 06:09 PM
  #2  
chrunck's Avatar
chrunck
6th Gear
15 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
Joined: Jul 2008
Posts: 2,270
Likes: 249
From: Albuquerque, NM
I would guess that you need to reset the windows, though I can't remember how to do that. I think you have to hold it in the up position for 5 or 10 seconds. The manual may say how to reset them.
 
Reply
Old Jun 28, 2012 | 07:42 PM
  #3  
Shoof's Avatar
Shoof
Thread Starter
|
5th Gear
iTrader: (1)
Joined: Jun 2009
Posts: 652
Likes: 7
From: LI, NY
Originally Posted by chrunck
I would guess that you need to reset the windows, though I can't remember how to do that. I think you have to hold it in the up position for 5 or 10 seconds. The manual may say how to reset them.
That was the first thing I tried. It had no effect. It's 21 taps to open the window, and 14 to close the window. I have no idea what this could be...
 
Reply
Old Jun 29, 2012 | 07:12 AM
  #4  
y8s's Avatar
y8s
4th Gear
10 Year Member
Joined: Jan 2012
Posts: 484
Likes: 18
From: DC Metro
when you say "taps" are you touching and letting go?

I mean if you hold the switch does it raise and lower normally?

I know the auto up feature doesn't work with the door open but you can still hold the switch to raise the windows.
 
Reply
Old Jun 29, 2012 | 08:47 AM
  #5  
Shoof's Avatar
Shoof
Thread Starter
|
5th Gear
iTrader: (1)
Joined: Jun 2009
Posts: 652
Likes: 7
From: LI, NY
Originally Posted by y8s
when you say "taps" are you touching and letting go?

I mean if you hold the switch does it raise and lower normally?

I know the auto up feature doesn't work with the door open but you can still hold the switch to raise the windows.
The windows are one touch up and down. If I tap the window switch and let go, the window should lower all the way. If I hold the switch and after a few seconds let go, the window should stop. The driver's side window isn't doing either. Whether I tap it or hold it, the window only drops an inch at a time. All of the other windows are working as they should - it's only the driver's side window that has the problem. I took a quick video this morning so you have clarification:

 

Last edited by Shoof; Jun 29, 2012 at 09:02 AM.
Reply
Old Jun 29, 2012 | 09:17 AM
  #6  
Sealy's Avatar
Sealy
6th Gear
Joined: Jan 2011
Posts: 1,461
Likes: 2
From: Cottage City, MD
Been there, done that. If the reset does not work, you need to: a. have it reprogrammed, or b. replace the window motor module. I had both done - if you can talk them into replacement to start with, I'd go that way. Also, when you get it back - check door locks and convience entry before you accept it. They forgot to plug mine back in. Three trips, three days to solve the problem.
 
Reply
Old Jul 2, 2012 | 03:12 PM
  #7  
Shoof's Avatar
Shoof
Thread Starter
|
5th Gear
iTrader: (1)
Joined: Jun 2009
Posts: 652
Likes: 7
From: LI, NY
Took my car in this morning. They attempted to re-program the system a few times and it didn't work. At this point they don't know what's wrong with it, and they are holding on to the car until tomorrow so they can communicate with MINI to figure out why this happened and what needs to be done to fix it.
 
Reply
Old Jul 9, 2012 | 07:18 PM
  #8  
Shoof's Avatar
Shoof
Thread Starter
|
5th Gear
iTrader: (1)
Joined: Jun 2009
Posts: 652
Likes: 7
From: LI, NY
Just an update, they ended up replacing the regulator/motor and everything is fine - for now..
 
Reply
Old Jul 10, 2012 | 07:56 AM
  #9  
shark715's Avatar
shark715
6th Gear
Joined: Feb 2009
Posts: 1,296
Likes: 5
From: north/central New Jersey
Hmmmm...driver's power window motor problems were commonplace on the early first generation (2002-2003) hardtops too.
 
Reply
Old Aug 4, 2012 | 12:04 PM
  #10  
Jonathan Fink's Avatar
Jonathan Fink
Neutral
Joined: May 2012
Posts: 10
Likes: 0
Today I got a gong and the window symbol with the Triangle ! in my display. It went away after a while. 300 miles.
 
Reply
Old Aug 4, 2012 | 06:08 PM
  #11  
kconner5's Avatar
kconner5
4th Gear
Joined: Jun 2011
Posts: 309
Likes: 0
I had my drivers side motor replaced, and now it's acting up again.. Wont always go up when I hit up, one touch seems to be fine, but even now the passenger window is acting up!! It hits the top and then goes back down a few inches...

Hi ho hi ho it's off to the dealer I go (again)

Kyle
 
Reply
Old May 13, 2014 | 04:35 AM
  #12  
chappybmode's Avatar
chappybmode
3rd Gear
iTrader: (1)
Joined: Jan 2012
Posts: 226
Likes: 1
From: Northeastern, WV
mine is having these issues now as well...just wondering. Reprogramming and the other fixes. What are those costing?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
thebordella
R56 :: Hatch Talk (2007+)
22
Aug 31, 2015 01:37 PM
cm.d
1st Gen Countryman (R60) Talk (2010-2015)
4
Aug 19, 2015 08:51 AM
bugeye1031
Navigation & Audio
0
Aug 15, 2015 08:14 AM
Minibeagle
Stock Problems/Issues
6
Aug 13, 2015 10:00 AM




All times are GMT -7. The time now is 03:03 AM.