North American Motoring - Head gasket thickness fJCW

North American Motoring (https://www.northamericanmotoring.com/forums/)

- Factory JCW Talk (2009+) (https://www.northamericanmotoring.com/forums/factory-jcw-talk-2009-303/)

- - Head gasket thickness fJCW (https://www.northamericanmotoring.com/forums/factory-jcw-talk-2009/337219-head-gasket-thickness-fjcw.html)

Head gasket thickness fJCW

I do have a fJCW (TF97447) with a burnt exhaust valve:
https://cimg1.ibsrv.net/gimg/www.nor...1e2d5973a4.jpg

I'm somewhat unsure about the head gasket that I should buy as replacement. There are 0.9mm and 1.2mm. JCW is often associated with the 1.2mm. I measured my old head gasket (4 layer metal) with a digital caliper and I have around 1mm at the edges (metal). Those were the identifiable markings on the gasket in the car:

https://cimg4.ibsrv.net/gimg/www.nor...8fb4be7a1e.jpg
https://cimg6.ibsrv.net/gimg/www.nor...c4379a37d9.jpg

Any hints, recommendations?

never mind. I measured at the wrong spot. At the cylinder it's the expected 1.2mm