Will the connectors need a little LED optical ring, part#63-31-9-304-049 to insert before they are snapped into the slots?.

 

My vehicle did not come with the illumination feature of the yours package.But it has 3 wires that are connected to nothing behind the dash.

 

My vehicle has the electrical connector behind the dash.There are 3 in number.

 

On the British Oak, Gold version selling on eBay, which side does light up?.Is it the center or the passenger side?.I am asking becoz the part have no stripes on the side but only on the center part!.
Concerning the LED modules, do we need the LED lamp that fits in the door opener as well?.Anything else that needs to connect to the LED modules?.
Please assist.Thanks.

 

So, if you ordered this piece, would it work? Plug and play?

https://parts.seattlemini.com/p/MINI...459350474.html

 

Is your vehicle right hand or left hand drive?.You must make sure U order the correct part.
You will also need 3 Led modules.
Before you embark on the project, You have to lift the radio in the center and pop out the pieces to check and see if there r the 3 connectors dangling underneath.

 

I was able to swap my Piano Black Trim to this Piano Black with Illumination/Yours Package.

The swap was a simple swap. My F60 came from factory OEM with the 3 connectors beneath the old trim. The replacement part with yours package, came from factory with built in LED modules. It was a plug & play. Had to remove the Radio screen to pop out the old trim and pop in the new one.

 

Is there a specific setting to turn the panel illumination on? I managed to get it working on the 3rd driver's profile, but my profile doesn't seem to work after the car is re-started.
Is there a daytime savings setting I may be missing or? I drive a 2018 Countryman PHEV and would like to have it on at all times.

Any help would be appreciated!