F60 Jack Pads for Frame Protection
#2
If you apply the floor jack directly to the plastic frame insert you will break the insert. Maybe you will get away with it at the rear but not the front points. You may be able to use the floor jack on the collapsed jack points a number of times if you are lucky but eventually you will be metal on metal and scratch the paint or worse. If you are doing more than chage a tire always use jack stands.
#3
#5
Does anyone make one that fits inside the rectangular plastic frame that can be bolted/screwed in permanently? With my car lowered and the side splitters installed I have to drive it onto some boards to get enough clearance for a some lots to work. I have to do the same to use my floor jack.
#6
Don't know if these fit our car or if you need something similar. https://www.waymotorworks.com/tsw-sh...ck-points.html
#7
Trending Topics
#8
#9
#10
The following users liked this post:
Crossingover (04-09-2018)
#11
The following users liked this post:
Crossingover (04-09-2018)
#12
The following users liked this post:
Crossingover (04-09-2018)
The following users liked this post:
Crossingover (04-09-2018)
#14
Thread
Thread Starter
Forum
Replies
Last Post
bluefox280
R55 :: Clubman Talk (2008+)
7
12-08-2017 04:39 AM
Conrad_Thomaier
General MINI Talk
3
12-14-2014 12:31 PM
Auto Paint Guard
Vendor Announcements
3
01-12-2004 06:55 AM