F60 Adding drivers assist
#1
Adding drivers assist
Apparently the assisted cruise uses a camera and I think my JCW has the forward facing camera needed.
I will be looking into the parts and coding to see if the mod can be done and if it can be done under 1K.
I added this to my F-150 and it was far cheaper for me to add...
I will be looking into the parts and coding to see if the mod can be done and if it can be done under 1K.
I added this to my F-150 and it was far cheaper for me to add...
#3
I agree. My truck is radar-based technology. In the MINI manual however, it discusses only a camera. I am going through the service manual though to cross-reference and hopefully learn the parts needed.
Coding will be a completely different investigation... but not worth looking into until I know the parts situation.
Coding will be a completely different investigation... but not worth looking into until I know the parts situation.
#4
#6
Read through the entire service manual and there are no module specifications/ install instructions. I did find a wiring diagram that does not list any sensor hardware, but did connect to the camera in front of the mirror.
I know I have the instrument cluster as it has the cruise light to be enabled...
Still looking.
I know I have the instrument cluster as it has the cruise light to be enabled...
Still looking.
#7
I have found out the system is camera based. And, I have the camera (which sits just underneath the mirror). I do need a new component in the steering wheel. When I pop that off, I will see if I have the harness/ plugs to enable the system. After that, it will be a matter of finding a VIN of a MCC with Driver's Assist enabled and getting their asbuilt data. Progress.
Trending Topics
#9
http://www.realoem.com/bmw/enUS/part..._S&mg=66&sg=30
https://www.ecstuning.com/b-genuine-...a/66516822683/
https://www.ecstuning.com/b-genuine-...516992830~oem/
You might also need a new windshield.