F60 E-Sys Coding on F60?
#77
03-08-2018, 09:40 AM
#79
03-10-2018, 12:10 PM
#80
04-27-2018, 08:16 AM
Neutral
ESYS use on Mac OS
If anybody has had any success with running this ESYS via VM software or any other means on a Mac that will not require me to purchase a new Windows license, please let me know. Thanks.
#83
07-09-2018, 01:48 PM
Just an FYI... I was able to program on my 2018 Countryman All4:
JCW HUD.
JCW LED center ring.
Door handle lights on in reverse.
Fogs on with high beams and parking lights.
All windows open and close via remote.
Disclaimer off.
Phone ring tone.
Hard braking light flash.
Video enabled while driving.
Seat belt warning silent after start.
JCW HUD.
JCW LED center ring.
Door handle lights on in reverse.
Fogs on with high beams and parking lights.
All windows open and close via remote.
Disclaimer off.
Phone ring tone.
Hard braking light flash.
Video enabled while driving.
Seat belt warning silent after start.
Last edited by ianparcher; 11-06-2018 at 12:42 PM.
#85
07-10-2018, 07:14 AM
#86
07-10-2018, 07:25 AM
Is it worth it?
What can you code that might be worth while?
I don't care about turning off the seatbelt warnings or welcome dings.
Maybe being able to use the fog lights with high beams? I never knew why they turn them off in high beams, I guess it doesn't matter up close you're looking waaay down the road with high beams?
Is there a list of all the stuff?
I have a cable for the scangage II, ODB to ethernet. Will that work and I just need software or what?
-=>Raja.
I don't care about turning off the seatbelt warnings or welcome dings.
Maybe being able to use the fog lights with high beams? I never knew why they turn them off in high beams, I guess it doesn't matter up close you're looking waaay down the road with high beams?
Is there a list of all the stuff?
I have a cable for the scangage II, ODB to ethernet. Will that work and I just need software or what?
-=>Raja.
#87
07-10-2018, 08:20 AM
#90
07-22-2018, 06:49 PM
#92
08-10-2018, 07:24 AM
#93
09-02-2018, 09:08 AM
Coded the following items yesterday with a BT adapter and the Bimmercode app on my 2019 SE:
Tailgate can now be closed from the interior door button or remote (long press). No need to physically go back to the tailgate if I press the wrong button.
Windows up with a long press
Mirrors fold in with a long press.
Mirrors fold out with an unlock
Initial legal confirmation at startup gone
European speed limit signs in HUD (why not? Just need to confirm it doesn't convert to KM)
The only glitch is that mirrors won't fold in while plugged into a charger while holding down the lock button on the remote.
Tailgate can now be closed from the interior door button or remote (long press). No need to physically go back to the tailgate if I press the wrong button.
Windows up with a long press
Mirrors fold in with a long press.
Mirrors fold out with an unlock
Initial legal confirmation at startup gone
European speed limit signs in HUD (why not? Just need to confirm it doesn't convert to KM)
The only glitch is that mirrors won't fold in while plugged into a charger while holding down the lock button on the remote.
#95
10-07-2018, 09:16 PM
2nd Gear
I intend to code my F60 pretty much as soon as I take it home. Certain things need to be, for my happiness:
- no legal disclaimers
- tire pressure & temp reading
- mirror folding w/door locking
- BMW gongs
- radio off w/door opening
- full texts viewable w/SMS
- 5x soft turn signal
- GPS time sync
- iPhone inbound ringer
Etc., etc.
- no legal disclaimers
- tire pressure & temp reading
- mirror folding w/door locking
- BMW gongs
- radio off w/door opening
- full texts viewable w/SMS
- 5x soft turn signal
- GPS time sync
- iPhone inbound ringer
Etc., etc.
#96
10-07-2018, 09:29 PM
2nd Gear
Turn signals in HUD won't work.
Speech input for SMS? Just hold down (versus push) voice button on steering wheel, and it will activate SIRI Handsfree, and you can just have "her" compose an SMS.
Tire temp you should DEFINITELY be able to do, but I forget the section. Look in HU_NBT though, I would think.
Mirror-folding is Spiegel Beiklappen bei Komfort Schließung, or something similar. I refined my coding yesterday, to where it now folds IMMEDIATELY upon locking doors (werte=0 [seconds]).
I would very very shocked if any coding possibilities that work on F56 do not also work on F60. I won't have my F60 until next month, however.
Speech input for SMS? Just hold down (versus push) voice button on steering wheel, and it will activate SIRI Handsfree, and you can just have "her" compose an SMS.
Tire temp you should DEFINITELY be able to do, but I forget the section. Look in HU_NBT though, I would think.
Mirror-folding is Spiegel Beiklappen bei Komfort Schließung, or something similar. I refined my coding yesterday, to where it now folds IMMEDIATELY upon locking doors (werte=0 [seconds]).
I would very very shocked if any coding possibilities that work on F56 do not also work on F60. I won't have my F60 until next month, however.
#97
10-07-2018, 09:38 PM
2nd Gear
Just an FYI... I was able to program on my 2018 Countryman All4:
JCW HUD.
JCW LED center ring.
Fogs on with high beams and parking lights.
All windows open and close via remote.
Disclaimer off.
Phone ring tone.
Hard braking light flash.
Video enabled while driving.
Seat belt warning silent after start.
JCW HUD.
JCW LED center ring.
Fogs on with high beams and parking lights.
All windows open and close via remote.
Disclaimer off.
Phone ring tone.
Hard braking light flash.
Video enabled while driving.
Seat belt warning silent after start.
#99
10-08-2018, 11:40 PM
You need to code hud in nbt and in kombi/tacho.
In my SE All4 my Kombi/tacho isn’t mapped out. Could someone who coded it tell me please in which node it is and how many down from the first row. Maybe i can code it blind. I only have to put 3 items in Active. If i know 3000 or 3001.... and the the first is 21 then i can code it too
) can anybody help me out with this?
In my SE All4 my Kombi/tacho isn’t mapped out. Could someone who coded it tell me please in which node it is and how many down from the first row. Maybe i can code it blind. I only have to put 3 items in Active. If i know 3000 or 3001.... and the the first is 21 then i can code it too
) can anybody help me out with this?
