|
Originally Posted by GnFnRnBacon
(Post 4425424)
Adds option to display tach with current gear and optimal shift points, I believe.
|
Hi how do you get speed limits on HUD for F60 please |
Any one know if you can code the following:
Modify the tone of the turn signals or at least turn the volume down? Modify or reduce volume of the "lock/unlock" chirp? Also, can you explain the artificial engine tone? First of all, why, Is the car quieter or does it act like white noise, second what happens if you change to the Roles Royce? Does it still have a nice throat? |
Video in Motion 2019 countryman s all4
Originally Posted by ianparcher
(Post 4404900)
Just an FYI... I was able to program on my 2018 Countryman All4:
JCW HUD. JCW LED center ring. Door handle lights on in reverse. Fogs on with high beams and parking lights. All windows open and close via remote. Disclaimer off. Phone ring tone. Hard braking light flash. Video enabled while driving. Seat belt warning silent after start. hey i I have bimmer code all up and running but cannot get video in motion working. Or video at all for that matter. I have the 8.8 in with nav. I have been able to get the audio from the videos to play. It that’s all. Help!!! |
Originally Posted by Heckster
(Post 4455885)
hey i I have bimmer code all up and running but cannot get video in motion working. Or video at all for that matter. I have the 8.8 in with nav. I have been able to get the audio from the videos to play. It that’s all. Help!!! |
So I have my F60 coded to fold the wing mirrors in if I lock from the fob and if I hold down the comfort access button. Any idea how I would go about getting the mirrors to fold if I lock the doors from the tailgate?
|
Hey All,
Been coding my F60 JCW ALL4 2020/2021 with bimmercode so far I've managed... -- Lights off when in 0 (0 did nothing here in the UK lights were still on) -- Handle lights on when in reverse. -- Start up in green mode. -- Remember stop start last setting.-- Turned off active sound (fake noise). -- DRL setting in menu -- Locking confirmation sound in menu What im stuck with and might need eSys for (please advise)... -- I can't configure welcome lights other than the rear lights and number plate leds. When I try to turn off main beam it doesn't work, no matter what I select the main beams are on with welcome lights. How do I get them off? I want DRLS only. -- I'd like the door handle lights to be indipendant from the interior lights setting. I have the interior lights turned off (press and hold interior light button) but this also turns off the door handle lights (i feel like these should be separate from this setting) Thanks! |
Originally Posted by Kilberz
(Post 4579607)
Hey All,
Been coding my F60 JCW ALL4 2020/2021 with bimmercode so far I've managed... -- Lights off when in 0 (0 did nothing here in the UK lights were still on) |
Originally Posted by JustinGTP
(Post 4579620)
Was this in expert mode? If so what line?
|
Originally Posted by Kilberz
(Post 4579622)
Set FLC_AKTIV to freigeschaltet_in_Stellung_A using expert mode for the Body Domain Controller.
|
still active?
Originally Posted by ianparcher
(Post 4404900)
Just an FYI... I was able to program on my 2018 Countryman All4:
JCW HUD. JCW LED center ring. Door handle lights on in reverse. Fogs on with high beams and parking lights. All windows open and close via remote. Disclaimer off. Phone ring tone. Hard braking light flash. Video enabled while driving. Seat belt warning silent after start. |
| All times are GMT -7. The time now is 05:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands