FWIW, in the past, if they have supply problems with a certain component, they will push the production estimate back a few months, but it may actually move back up once the supply opens up again. A year or two ago, there was a problem with the navigation units and dealers were told there would be a 6 month delay, but the nav units became available after only a few months instead.
|
Originally Posted by TheJuice
(Post 4290098)
Did you have driver's assist package as well?
|
Originally Posted by tizeye
(Post 4290135)
Hate to sound dumb, but what is the driver assist package? Build only lists Technology, Convenience, Premium, Cold Weather, JCW Interior and Exterior and of course, Fully Loaded on the S and Sport on the non-S. I ordered mine with Technology, Premium, and JCW Interior and no problem on the build which was in February. Tempted on the Convenience but only the picnic seat was of interest, and that begs to be an accessory - either Mini or 3rd party, but right now package only.
|
Originally Posted by Carlisle
I just heard back from my MA. I ordered my F60 loaded (no leather though for personal preference) a week ago and apparently there is an issue with the driving assistant package. I was initially told the wait would be 12 weeks. Now, I am told that if I want that option I will have to wait until November or December for delivery. Thoughts? I'm thinking there is a reported problem with the tech, a supply shortage (so they prioritize BMW models that may come with it as standard equipment), but I just don't know. I said go ahead and order it without but I'm a little miffed. How the hell are we just hearing about this now?
|
Originally Posted by Carlisle
(Post 4290152)
I think in the USA it is called Active Driving Assistant? It's a $1,000.00 option that gives you either laser or radar guided cruise control (might use a camera?) and collision mitigation whereby the car will break autonomously on your behalf should you get too close to another car or obstacle. Sad that it is an option and not standard equipment. It would be a significant insurance deduction where I live.
I know they updated the Active Cruise Control function, which comes with Active Driving Assistant to include Stop and Go function....wondering if that's the cause of the delay? |
Originally Posted by MKDrCr
(Post 4290109)
Yes I did. Emailed the dealer, waiting for a response.
I mentioned to the Dealer and the call center about the delay due to the Driver Assist, neither were aware of any bulletins or announced production delays. I'm curious, is anyone else experiencing any delays? I'll keep you all updated. |
Not the same build as yours, no driver assist, but, we ordered our Countryman S on 2/28, build started 3/13, waiting for a boat on 3/25.
|
Back in Mini Club (Used to own R50).
Ordered Chestnut with Black top, Convenience/Cold/Tech package + power tailgate and Piano black illuminated interior today. Build week 16, so the wait begin. |
That's strange about the Active Driving Assistant. I want it for speed limit info, the rest of the package isn't much use especially with a manual transmission but it appears to be the only way to get the camera to do speed limit info.
Either way, it's not available as an option on the JCW build and order guide, so I don't even know how to order it at this point. But if it's just going to delay things, I'll probably just skip it and force myself to look at speed limit signs again. The JCW guide is a 2018 model year one though and the Countryman guide I have is still 2017 model years, so maybe the Active Driving Assistant has been dropped for the time being do to parts availability. |
Originally Posted by MKDrCr
(Post 4290983)
I'm still stuck in limbo. Dealer has reached out to their Mini rep, but still waiting on a response. Tried 1-866-ASK-MINI again, now there is no estimated production date, whereas, last week it was May. It was originally March, but the call center told me, "we see that the originally scheduled production date has lapsed and now we have no information."
I mentioned to the Dealer and the call center about the delay due to the Driver Assist, neither were aware of any bulletins or announced production delays. I'm curious, is anyone else experiencing any delays? I'll keep you all updated. Anyway, 1-866-ASK-MINI told me that production started today, estimated date of completion is 4/18. |
My MINI boarded a vessel yesterday! Expected arrival to New York/New Jersey port on April 13.
|
My CAR JUST DISCHARGED and cleared customs . Any other way track it from this point
|
You guys are all getting your CMs so quickly! I was told to expect a 12 week wait! It has been three weeks for me now and as of yesterday I still didn't have a VIN.:cry:
|
Originally Posted by Carlisle
(Post 4292988)
You guys are all getting your CMs so quickly! I was told to expect a 12 week wait! It has been three weeks for me now and as of yesterday I still didn't have a VIN.:cry:
|
Originally Posted by Carlisle
(Post 4292988)
You guys are all getting your CMs so quickly! I was told to expect a 12 week wait! It has been three weeks for me now and as of yesterday I still didn't have a VIN.:cry:
|
Originally Posted by MKDrCr
(Post 4293067)
I only got a VIN on Tuesday. I ordered on 3/2, but with the drivers assist there were some delays. Should be completed 4/18, so I'm probably looking at 10-12 weeks from when I ordered as well. It's ironic though that you were told you couldn't get driver's assist and still have a long wait.
|
The plot thickens...
So... I'm being told by my MA that larger markets are being prioritized for the Driving Assistant option, and that even then there is a longer wait because it is never ordered by dealerships unless they are doing a custom order and it has been requested. My MA basically said that orders stay in a queue and when they have enough ppl requesting that option then they will build them all at once. (???) I don't know enough about the build process but I find that crazy tbh.
Update: Engine was put in mine yesterday. :thumbsup: |
Originally Posted by Carlisle
(Post 4293825)
So... I'm being told by my MA that larger markets are being prioritized for the Driving Assistant option, and that even then there is a longer wait because it is never ordered by dealerships unless they are doing a custom order and it has been requested. My MA basically said that orders stay in a queue and when they have enough ppl requesting that option then they will build them all at once. (???) I don't know enough about the build process but I find that crazy tbh.
Update: Engine was put in mine yesterday. :thumbsup: On a positive note, my Countryman is just pulling into Brunswick Port as I type this! YEAH! |
Originally Posted by TheJuice
(Post 4292222)
My MINI boarded a vessel yesterday! Expected arrival to New York/New Jersey port on April 13.
|
Originally Posted by howardeng
(Post 4293881)
Our Countryman is on that vessel too. Not sure if you have been tracking the TOMAR, but, it is adrift outside Halifax. :confused: MarineTraffic had it about 1 knot since this morning, with a comment of "not in command." From my boating days, that means no engine, or something else causing it to not move. It made 14 for a couple minutes at 4:30ish, I just happened to look then....But now it is back to 0.9 knots. Engine trouble maybe...
|
got it
|
Originally Posted by howardeng
(Post 4293881)
Our Countryman is on that vessel too. Not sure if you have been tracking the TOMAR, but, it is adrift outside Halifax. :confused: MarineTraffic had it about 1 knot since this morning, with a comment of "not in command." From my boating days, that means no engine, or something else causing it to not move. It made 14 for a couple minutes at 4:30ish, I just happened to look then....But now it is back to 0.9 knots. Engine trouble maybe...
|
I saw it was in dock too. If it wasn't just waiting, I hope they find a good mechanic. Lol.
|
Originally Posted by tizeye
(Post 4293985)
In port this AM and at a dock for offloading vehicles. Looking at satellite view of google maps, Halifax only has one dock that offloads to a vehicle staging/parking area as other docks would require entering primary roads to get to the staging area. Guessing Tomar had to sit out there waiting for port clearance when as looking at the past history of Athens Highway, it didn't depart that dock until 20:00 where Tomar entered the holding pattern offshore at 12:25.
|
|
All times are GMT -7. The time now is 10:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands