F55/F56 Mini coding/programming
#652
just respond to shawn and you'll get everything:
http://www.bimmerfest.com/forums/sho...38188&page=443
due to the gray area of coding, any distribution of DL links i just direct to that thread.
http://www.bimmerfest.com/forums/sho...38188&page=443
due to the gray area of coding, any distribution of DL links i just direct to that thread.
#655
I tried some coding myself on my new mini clubman. I know this isn't exactly the F56, but it is the most active topic regarding coding with e-sys.
I tried coding the option for video enabling during driving. I tried the options stated in the several forums, but everytime it switches back with the warning message. Does anybody know if this is completely different then the F56?
Other coding options did work for me.
I tried coding the option for video enabling during driving. I tried the options stated in the several forums, but everytime it switches back with the warning message. Does anybody know if this is completely different then the F56?
Other coding options did work for me.
#656
I tried some coding myself on my new mini clubman. I know this isn't exactly the F56, but it is the most active topic regarding coding with e-sys.
I tried coding the option for video enabling during driving. I tried the options stated in the several forums, but everytime it switches back with the warning message. Does anybody know if this is completely different then the F56?
Other coding options did work for me.
I tried coding the option for video enabling during driving. I tried the options stated in the several forums, but everytime it switches back with the warning message. Does anybody know if this is completely different then the F56?
Other coding options did work for me.
#658
Other things, if you program IHKA (related to the heater or AC) your AC light will blink and you won't be able to turn off the fan until the car completes a recalibration process. To recalibrate turn on engine and let it idle for 1 minute. After this the AC will start working normally and you will be able to turn off fan. There's no "magically letting it set in for couple hours" or "locking the car for 15 minites and coming back" to let it adjust. It's the calibration process that needs to take place. I also read that every once in 20 times or so the AC will redo calibration but I don't know for sure of this or it's hard to tell when it happens.
If you program BKOMBI your trip computer and clock will reset. No real side effects other than that.
If you program ACSM for seatbelt warnings and safety related stuff you will have a check engine warning light. You just need to use the error reset tools to rearm the airbags. The resetting tool is in ESYS external programs.
This is what I do on mine (my cheat sheet):
https://www.dropbox.com/s/qxbp4weftrhf0k3/2015%20F56%20Coding%20-%20Base%2020161201.pdf?dl=0
#663
#664
#665
#666
Happy Holidays....so just a few notes on how this code works.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
Last edited by MarcoPolo; 12-30-2016 at 07:05 PM.
#667
Mine Works
Happy Holidays....so just a few notes on how this code works.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
Last edited by one2three_us; 12-30-2016 at 10:39 PM.
#668
Happy Holidays....so just a few notes on how this code works.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
- there is no "sport mode default" or "eco mode default" option.
- what does exist is "recall last setting". so if you shut off in eco or sport mode, when you turn on, it'll stay that way.
- the coding does 2 things...
- first, you have to ALLOW sport mode and/or ECO mode to be recalled.
- secondly, you have to activate the recall function.
now that the explanation is out of the way......
BDC
3221 PfFesMaster, 11
Fesallowmode7lastfunction - change to aktiv to allow eco mode to be recalled
Fesallowmode4lastfunction - change to aktiv to allow sport mode to be recalled -
Feslastfunctioninterval - change werte value to FF (it will show up as "UNKNOWN"..ignore it). this activates the recall function
save and test.
P.S. these settings only showed up after my ecu was updated after i had the bbk installed. on my original software (2/2014 build) it did NOT show up. if this doesn't show up for you, you know why. come up with a reason for mini to update your software.
Question, how did you know Mode4 is Sport, and Mode7 is Green mode?
What are the other ones, Mode2 and Mode8?
To get a software update from the dealer, you can complain about the trunk accidentally opening caused by the remote button being accidentally pressed. Caused by a bad design on the remote. After the update, the UI on the speedo changes a little (temperature, green miles, they make use of more pixels) and my Green mode saved miles counter works much more reliably.
Last edited by hp79; 12-31-2016 at 03:43 PM.
#669
- if you look a few slots up, you'll see more options that say "FesHasMode1", "FesHasMode2", etc... they all have "nicht_aktiv" except....Mode4 and Mode7. that led me to believe that sport and eco were 4 and 7. i'm curious what would happen if i made FesHasmode2 and FesHasmade8 active...would comfort+ or sport+ show up? i know for bmw's, sport+ is sport mode with some increased spin threshold.
i didn't care to try.
#670
That's what I'd like to get figured out someday - Sport+ is basically Sport mode with DTC on/DSC off.
#671
What would Green+ mode bring on top of Green mode?
#673
Not sure - MINI doesn't have a Sport+, but on the some BMWs (usually M-cars) I know Sport+ is as I described above. Don't know what else it does, if anything. It may very well not be possible, but will try this weekend.
#674
It has been a while since I have last coded my car. After seeing that you can get the car to remember sport mode I wanted to give it a try. I got everything installed but when I use the esys launcher premium it gives me the esys splash screen then nothing else. What am I doing wrong?
Thanks
Thanks