When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Raceseng has some nice new parts for the F Series cars. All the items are what you would expect from Raceseng. High quality and attention to detail, and, everything fits like a glove. I'll post pictures of the parts first and then pictures of them installed on my F56. All parts are made in the USA.
First up is the Tug Plate, a license plate mount utilizing the front tow hook mounting point.
FEATURES
• Ball joint mount allows complete plate articulation
• Plate can be adjusted in or out from front bumper to tighten fitment
• Multiple plate mounting locations
• Works with all license plate frames
Next is the Tug Plate View. A GoPro mount for the Tug Plate.
FEATURES
• Works with any GoPro case with a dual ear mount
• Adjustable camera angle up \ down and left \ right
• Simply bolts on with 2 screws
Tug (Shaft + Ring) These can be purchased separately.
FEATURES
• Available in black, graphite and red powder coated finishes
• Simple ring locking bolt keeps the ring in a vertical or horizontal position
• Engineered using FEA analysis and tested to SAE standards
• Capable of 9,000lb straight pull
Tug View is a GoPro mount for the Tug Ring assembly.
FEATURES
• Works with any GoPro case with a dual ear mount
• Adjustable camera angle
• Rigid mount provides stable footage
• Keeps camera tucked close to the front or rear bumper
Tug Tool V2. I personally recommend the V2 over the original because it is beefier (X2 thickness) and it has a bottle opener
The Tug Tool is used to aid in the tightening of the tow hook shaft nut. In certain installations, there is very little space left to fit a large 25mm wrench. The Tug Tool is designed to be a thin wrench and makes installation and use easier.
And now for the pictures of the parts installed on my "Lightly Modified" F56.
Tug Ring
Tug Ring + Tug View
Tug Plate + Tug Plate View
And finally a couple shots with a GoPro installed.
You can't go wrong with these parts. The quality and fit are top notch. They would be a great addition to your car before you head to the Dragon this year. Installation is super simple. Installation instructions are available on the Raceseng website shown below. I highly recommend these parts to anyone. I'll say up front that they're not the most inexpensive parts out there, but you get what you pay for in this instance.
Tools required:
Tug Tool or 25mm wrench
20mm socket + ratchet
4mm Allen wrench
3mm Allen wrench
5/8" wrench is nice to have for tightening the **** that clamps the camera in place. I keep a short ratchet wrench in the car for this.
Last edited by vetsvette; Feb 10, 2019 at 10:31 AM.
