F55/F56 Mini coding/programming
#751
12-14-2017, 02:23 PM
I'd modify as follows:
1. Turn on ignition but do not start car (also I'm unfamiliar with why sport mode is important. is it? note: the vehicle mode doesn't matter wrt the various coding settings for "staying in sport mode")
1.5 Put phone in airplane mode but then turn on wifi
2. Connect phone-Wi-Fi
3. Start Bimmercode.
4. Choose which changes I want from menu.
1. Turn on ignition but do not start car (also I'm unfamiliar with why sport mode is important. is it? note: the vehicle mode doesn't matter wrt the various coding settings for "staying in sport mode")
1.5 Put phone in airplane mode but then turn on wifi
2. Connect phone-Wi-Fi
3. Start Bimmercode.
4. Choose which changes I want from menu.
So I am a virgin coder on a F56S. I have read all of the threads and I just wanted to confirm the steps with the Vgate Pro Wi-Fi and Bimmercode, android.
1. Start car in "sport mode" and plug in Vgate-I want to program "last start mode-In sport mode.
2. Connect phone-Wi-Fi
3. Start Bimmercode.
4. Choose which changes I want from menu.
Turn car off and restart and check changes.
If I want to have the back fogs act as extra brake lights, I need to:
1. Go in expert mode and "activate" rear fogs.
2. Go to expert mode and change settings (previous posts) to activate change to rear fogs.
Am I close? Thanks.
1. Start car in "sport mode" and plug in Vgate-I want to program "last start mode-In sport mode.
2. Connect phone-Wi-Fi
3. Start Bimmercode.
4. Choose which changes I want from menu.
Turn car off and restart and check changes.
If I want to have the back fogs act as extra brake lights, I need to:
1. Go in expert mode and "activate" rear fogs.
2. Go to expert mode and change settings (previous posts) to activate change to rear fogs.
Am I close? Thanks.
#753
12-14-2017, 04:18 PM
OVERDRIVE
I think that "start in last mode" means it will start up the way you last shut the car down. So if you drove in Eco mode and shut the car off it would next start up in Eco mode. At least that is the way I understand it. Haven't coded that as I don't like to put car into Sport mode until it warms up a bit.
#754
12-14-2017, 05:37 PM
Right so basically code it to stay on sport mode then shut it off once it's coded.
Then, turn your Mini completely on (when the engine starts), switch it to Sport then shut it off.
Next time you turn it on, SPORT MODE!!!!! The greatest code you can do for your Mini! I seriously could have stopped with that code right there
...... but I didnt
Also, her is my post I made to make the fog lights work as brake lights: https://www.northamericanmotoring.co...ml#post4351648
Then, turn your Mini completely on (when the engine starts), switch it to Sport then shut it off.
Next time you turn it on, SPORT MODE!!!!! The greatest code you can do for your Mini! I seriously could have stopped with that code right there
...... but I didnt
Also, her is my post I made to make the fog lights work as brake lights: https://www.northamericanmotoring.co...ml#post4351648
#755
12-14-2017, 05:50 PM
#757
12-14-2017, 07:01 PM
Yes and no.
It remembers your last setting so it will start in that the next time you turn it on. If you would shut it off in Eco mode (barf) it would start up in Eco mode (barf barf) the next time you start it up
#758
12-15-2017, 12:58 PM
- turn off in sport, turns on in sport
- turn off in eco, turns on in normal
#761
12-15-2017, 02:26 PM
Got it to start in "Sport" and legal crap gone on startup. Cannot get mirrors to fold and unfold-have comfort access and folding. They do, however, unfold at 5km. After the last dealer update, they would not until 50km (how dumb). Android version. thought I would solve this before rear fog as brake lights.
#763
02-15-2018, 10:13 AM
The following users liked this post:
herbie_53_guy (02-15-2018)
#764
02-15-2018, 10:18 AM
#765
02-22-2018, 02:51 PM
1st Gear
Join Date: Dec 2008
Location: Geneva
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Hello Miniac's!
I sold my R52 Sidewalk for F57 2017 Pack JCW exterior/exterior and want 2-3 coding
I wish to open and close my mirrors without comfort access. Also I'd like to open the convertible roof with the key and night mode off for the ODB.
I tried with Carly without success. BimmerCode is better, I managed to activate some fun stuff:
- Tires temperature
- Sport mode by default
- No more start / stop
- Glass going up and down even with open door
-...
Has anyone done what I'd like on a F57 ?
I removed comfort access when I ordered my Mini and now I regret it.
I sold my R52 Sidewalk for F57 2017 Pack JCW exterior/exterior and want 2-3 coding
I wish to open and close my mirrors without comfort access. Also I'd like to open the convertible roof with the key and night mode off for the ODB.
I tried with Carly without success. BimmerCode is better, I managed to activate some fun stuff:
- Tires temperature
- Sport mode by default
- No more start / stop
- Glass going up and down even with open door
-...
Has anyone done what I'd like on a F57 ?
I removed comfort access when I ordered my Mini and now I regret it.
#767
02-23-2018, 07:22 PM
Anyone know if it's possible to do any coding to make traction control less aggressive? I have a diff, and I find that it works best with DTC enabled. DTC is annoying, though, because it isn't compatible with cruise control. It seems like there has to be some happy medium, right? Maybe something that would be the default on a Challenge car or something?
--Matt
--Matt
#769
02-25-2018, 10:12 AM
I've tried using Bimmercode with my Android phone to code my 2018 Mini. On my first attempt, I made a handful of changes and hit Code. I received a message that the connection wasn't strong enough, and the app disconnected from the device. On my second try I attempted to only make one change. That worked. I tried again and got the same message I got the first time. Every time I tried again I got the same message. I'm giving up for now.
Coding via WiFi with Bimmercode is excruciatingly slow. Is there any way to use a cable with a MacBook Pro (without using Parallels or any other Windows app)?
Coding via WiFi with Bimmercode is excruciatingly slow. Is there any way to use a cable with a MacBook Pro (without using Parallels or any other Windows app)?
#771
02-25-2018, 11:00 AM
#774
02-25-2018, 12:29 PM
I would still prefer a wired connection if that's available to me.
