F55/F56/F57 Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for F55/F56 MINI Cooper AND Cooper S models.

Automatic Transmission Fluid Question

  #26  
Old 06-09-2017, 11:49 AM
Chazman's Avatar
Chazman
Chazman is offline
4th Gear
Join Date: Jul 2014
Location: Los Angeles CA
Posts: 306
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by boubi View Post
Hi,
is there any official recommendations from Mini about the exact quantity of oil you have to fill the gearbox with ??
Because measuring what comes out is a solution, but is it precise enough.............I'm wondering

I have just seen on the minimania website that it is mentioned that the oil capacity is : 5.8 quarts (5.50 liters).
So, if I understand well, it means that when you change the transmission oil by yourself, only 55% of the oil comes out ( as people says above they got about 3 quarts out ).............!!


As far as I know Mini does not tell consumers about the exact quantity.
I believe they claim ATF as 'LIFETIME' meaning you don't have to change - that I NEVER believe.


Even if you know the exact quantity, you will never extract that exact quantity by simply draining from the drain bolt because torque converter holds about 40-50% of the total.


So, putting in what you drain out is as best as you can do.


If anyone else has a better or more accurate method of filling in correct quantity after draining, please post!


It's a shame for Mini and all other manufacturers those who claim ATF as lifetime and not installing a ATF dipstick to save a few $$.
 
  #27  
Old 06-09-2017, 12:24 PM
boubi
boubi is offline
2nd Gear
Join Date: Apr 2017
Location: France ( Paris )
Posts: 87
Likes: 0
Liked 10 Times in 6 Posts
Originally Posted by Chazman View Post
you will never extract that exact quantity by simply draining from the drain bolt because torque converter holds about 40-50% of the total.
Thank you for your answer.
Even if knowing that I will only get out 40/50% of the used oil isn't really a good news
 
  #28  
Old 06-09-2017, 04:11 PM
Chazman's Avatar
Chazman
Chazman is offline
4th Gear
Join Date: Jul 2014
Location: Los Angeles CA
Posts: 306
Likes: 0
Liked 0 Times in 0 Posts
So what I do is frequent ATF change like every 20,000 miles or so.
And, amazingly, you can feel the improvement of smoother buttery shifting with only 40/50% change!
 
  #29  
Old 06-10-2017, 01:32 AM
boubi
boubi is offline
2nd Gear
Join Date: Apr 2017
Location: France ( Paris )
Posts: 87
Likes: 0
Liked 10 Times in 6 Posts
OK.
My mileage is 30.000.
I'm gonna wait a little bit more and will do the job by myself.
 
  #30  
Old 06-12-2017, 11:36 AM
ECSTuning's Avatar
ECSTuning
ECSTuning is online now
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth,OH
Posts: 27,547
Liked 528 Times in 509 Posts
Yes, low miles it might not be worth it unless you are tracking or racing it.
 
__________________

Have MINI questions? Need MINI answers? Live Chat us! 8:30am to 12:00am Midnight EST
[email protected] | [email protected] | INSTAGRAM | FACEBOOK
Customer Service Hours: 8:00 AM to 8:00 PM EST|Sales Team Hours: 8:00 AM to 11:00 PM | Saturday 10AM to 7PM EST 800.924.5172
  #31  
Old 06-13-2017, 11:24 AM
boubi
boubi is offline
2nd Gear
Join Date: Apr 2017
Location: France ( Paris )
Posts: 87
Likes: 0
Liked 10 Times in 6 Posts
No, it's not the case !!
 
  #32  
Old 07-15-2018, 11:23 AM
limmys10
limmys10 is offline
Neutral
Join Date: Jul 2018
Posts: 4
Liked 0 Times in 0 Posts
Post No fluid from first plug

Hi all,

Not sure if anyone is going to end up seeing this but I went to drain mine today and when I took the first bolt out of the drain plug nothing came out but a single drop... Could mine be low on oil and need some extra put in when I top it up? or should nothing come out?

Also can anyone confirm is it indeed a 17mm hex?

FYI From the UK so I don't know if anything is different but I have ATF6 fluid from Febi Bilstein who said it was the right one and BMW said it was definitely ATF6 fluid for the gearbox.

Cheers
 
  #33  
Old 07-15-2018, 11:34 AM
RB-MINI's Avatar
RB-MINI
RB-MINI is offline
6th Gear
iTrader: (1)
Join Date: Oct 2009
Posts: 1,469
Liked 101 Times in 94 Posts
Did you remove the overflow standpipe from inside the drain hole?
 
The following users liked this post: RB-MINI
limmys10 (07-15-2018)
  #34  
Old 07-15-2018, 11:34 AM
TVPostSound
TVPostSound is offline
6th Gear
iTrader: (3)
Join Date: Mar 2014
Location: Granada Hills, CA
Posts: 1,453
Liked 126 Times in 116 Posts
Originally Posted by limmys10 View Post
Hi all,

Not sure if anyone is going to end up seeing this but I went to drain mine today and when I took the first bolt out of the drain plug nothing came out but a single drop... Could mine be low on oil and need some extra put in when I top it up? or should nothing come out?

Also can anyone confirm is it indeed a 17mm hex?

FYI From the UK so I don't know if anything is different but I have ATF6 fluid from Febi Bilstein who said it was the right one and BMW said it was definitely ATF6 fluid for the gearbox.

Cheers
Nothing comes out of the first bolt, its the plug to the overflow tube, which you must also remove.
 
The following users liked this post: TVPostSound
limmys10 (07-15-2018)
  #35  
Old 07-15-2018, 11:45 AM
limmys10
limmys10 is offline
Neutral
Join Date: Jul 2018
Posts: 4
Liked 0 Times in 0 Posts
ahh, from earlier replies I thought some came out of the first bolt too! thanks

Then when it is drained just refill with the same amount through the top bolt, sounds easy enough!
 
  #36  
Old 07-15-2018, 11:57 AM
RB-MINI's Avatar
RB-MINI
RB-MINI is offline
6th Gear
iTrader: (1)
Join Date: Oct 2009
Posts: 1,469
Liked 101 Times in 94 Posts
That’s assuming the trans has the correct amount of fluid to begin with. There’s a temperature range the fluid should be in when checking the fluid level. When colder it will be lower and might have been the reason you didn’t get anything out when you pulled the drain plug. If the fluid is too hot when setting the level, the transmission will actually be under filled, or overfilled if too cold.
 
  #37  
Old 07-15-2018, 12:01 PM
limmys10
limmys10 is offline
Neutral
Join Date: Jul 2018
Posts: 4
Liked 0 Times in 0 Posts
I had just been for a 'fun' drive so it was quite warm which would explain it, thank you!
 
  #38  
Old 07-15-2018, 12:30 PM
RB-MINI's Avatar
RB-MINI
RB-MINI is offline
6th Gear
iTrader: (1)
Join Date: Oct 2009
Posts: 1,469
Liked 101 Times in 94 Posts
Strange, if the fluid level was correct the hot expanded fluid should have drained out more than a single drop after your fun drive.

It’s really important to have the fluid in the correct temp range when checking the fluid. If the level is set when too cold, the fluid will be condensed the trans would actually be overfilled when in the proper temp range. Too hot and you’ll end up underfilled.

On a 3rd gen car you should be able to get a trans fluid temp reading with a scan/diagnostic tool, or on your gauge display when in a diagnostic mode. Same with 2nd gens, but 1st gens need to use a thermometer in the fluid.
 
  #39  
Old 07-15-2018, 12:33 PM
limmys10
limmys10 is offline
Neutral
Join Date: Jul 2018
Posts: 4
Liked 0 Times in 0 Posts
Originally Posted by RB-MINI View Post
Strange, if the fluid level was correct the hot expanded fluid should have drained out more than a single drop after your fun drive.

It’s really important to have the fluid in the correct temp range when checking the fluid. If the level is set when too cold, the fluid will be condensed the trans would actually be overfilled when in the proper temp range. Too hot and you’ll end up underfilled.

On a 3rd gen car you should be able to get a trans fluid temp reading with a scan/diagnostic tool, or on your gauge display when in a diagnostic mode. Same with 2nd gens, but 1st gens need to use a thermometer in the fluid.
I tried getting my diagnostic OBD reader to work before but BMW has it locked down for the basic ones, need one better than mine I think.

It was jacked up on the left side so I could get under, possible that it was just all on one side so never came out I suppose... I will try ramps next time.

From the few drops that came out with the bolt it was dark/black so I reckon it could do with a change.

Thaks for the help
 
  #40  
Old 03-23-2019, 06:31 AM
mvt888
mvt888 is offline
Neutral
Join Date: Dec 2014
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
Do you need to run the engine during refill process and changing thru the gears as these instructions suggest?

https://www.newtis.info/tisv2/a/en/f...ion/1VnXzDJ0hq

Thanks
 
  #41  
Old 03-25-2019, 08:18 AM
rockethot's Avatar
rockethot
rockethot is offline
Neutral
Join Date: Mar 2019
Posts: 6
Liked 0 Times in 0 Posts
Originally Posted by ECSTuning View Post
MINI states per the ETK that the oil is ATF 6 83222355599, the F56 has an updated version of the Aisin 6 speed that the older MINI have.

The JWS 3309 83222220438 is compatible with Redline D4 ATF 70/75w gl-4 which is for the gen 1 and Gen 2 MINI with the Aisin automatic.

So is the ATF 6 compatible redline D6 ATF 70/75w gl-4

D6 is the same but with a lower viscosity shear stable fluid which is what the newest Aisin MINI transmission recommends F56+. Will it do anything if you run JWS 3309 in the F56+, might not. It's hard to tell as it would have to be a long-term analysis.
So the Redline D6 ATF is safe to use on a third gen Mini?
 
  #42  
Old 03-25-2019, 09:42 AM
ECSTuning's Avatar
ECSTuning
ECSTuning is online now
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth,OH
Posts: 27,547
Liked 528 Times in 509 Posts
Based off what it looks its close to the same, but with that lower viscosity.
 
__________________

Have MINI questions? Need MINI answers? Live Chat us! 8:30am to 12:00am Midnight EST
[email protected] | [email protected] | INSTAGRAM | FACEBOOK
Customer Service Hours: 8:00 AM to 8:00 PM EST|Sales Team Hours: 8:00 AM to 11:00 PM | Saturday 10AM to 7PM EST 800.924.5172
  #43  
Old 04-15-2019, 11:51 AM
rockethot's Avatar
rockethot
rockethot is offline
Neutral
Join Date: Mar 2019
Posts: 6
Liked 0 Times in 0 Posts
Originally Posted by RB-MINI View Post
Strange, if the fluid level was correct the hot expanded fluid should have drained out more than a single drop after your fun drive.

It’s really important to have the fluid in the correct temp range when checking the fluid. If the level is set when too cold, the fluid will be condensed the trans would actually be overfilled when in the proper temp range. Too hot and you’ll end up underfilled.

On a 3rd gen car you should be able to get a trans fluid temp reading with a scan/diagnostic tool, or on your gauge display when in a diagnostic mode. Same with 2nd gens, but 1st gens need to use a thermometer in the fluid.
Do you know what the correct temperature range is?
 
  #44  
Old 04-16-2019, 06:00 AM
rockethot's Avatar
rockethot
rockethot is offline
Neutral
Join Date: Mar 2019
Posts: 6
Liked 0 Times in 0 Posts
Just thought I would let everyone know that Aisin makes an ATF that specifically lists BMW ATF 6 (Part Number 83222355599) compatibility. I wasn't able to find any american retailers that carry it. However, you can get it imported from the UK from the Rough Trax 4x4 Website. For me the total with shipping is $88.99. The cheapest I could find 5 liters of the BMW ATF 6 is $194.80. Over $100 difference. Now I just have to decide if I want to replace my ATF every 25k or every 30k miles.
 
  #45  
Old 04-16-2019, 09:21 AM
RB-MINI's Avatar
RB-MINI
RB-MINI is offline
6th Gear
iTrader: (1)
Join Date: Oct 2009
Posts: 1,469
Liked 101 Times in 94 Posts
Originally Posted by rockethot View Post
Do you know what the correct temperature range is?
Not sure if anything changed for the newer transmissions, but 35-45 C (95-113 F) is what I've seen for the Gen 1 and 2's.
 

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: