Passenger airbag warning light deactivation interruption.
 

Hi all,
I was installing a dash cam in the car today, and made a school boy error, didn’t disconnect the battery!

Anyway, I was trying to route the dash cam power cable up the passenger side, and I removed a few panels. The issue I believe I have caused, on the passenger deactivation switch, near the air vent and glove box, I wanted to remove the plastic panel, so I thought I’d unplug and disconnect the airbag deactivation switch. Of course when I reconnected it all, I now get a warning about the passenger airbag fault. I have a OBD II Wi-Fi reader and Bimmerlink, so I was hoping to clear the fault, however I can’t figure out how to do it, if I can even actually do it with Bimmerlink or not.

Can anybody help explain the process, for clearing the fault, if at all possible?

Edit: Solved.