North American Motoring - Electrical HELP with auto up passenger window and NCSExpert!!

North American Motoring (https://www.northamericanmotoring.com/forums/)

- Electrical (https://www.northamericanmotoring.com/forums/electrical-194/)

- - Electrical HELP with auto up passenger window and NCSExpert!! (https://www.northamericanmotoring.com/forums/electrical/229835-help-with-auto-up-passenger-window-and-ncsexpert.html)

HELP with auto up passenger window and NCSExpert!!

Hi can someone help me?? i downloaded everything GTECKO provided for coding my 07 MCS! I tried several codes that were in the spreadsheet and worked great! but I can't get to work the auto up passenger window! when I try to write the FRM Module it shows an error! Something wrong with EDIABAS and BIP-0009: faulty best ! I am using the V38 datens provided by GTECKO, I read another thread about updating EDIABAS to 7.2, i did it and no more error message! it says coding ended but nothing happens! it doesn't overwrite mi FRM module! any help appreciated!

Thanks

Quote:

Originally Posted by flamehacker (Post 3508309)

Make sure you don't have more than one NCSExpert, INPA or EDIABAS server running. Also make sure your battery voltage is not so low the systems are shutting down. I had that happen once - scared the Sh*t out of me - the car wouldn't start. I am by no means an expert but I have seen all of these cause errors.

Im having the same issue with my passenger side going auto up. My sunroof and drivers side both work fine.