Electrical Installed Ziza Position Lights Tonight
#1
#3
Just had to turn the wheels sideways to get enough access to the lights in the wheel well. Was kinda tight, but got the first one in in 15 minutes and the second one in 5 mins. I just struggled a little bit because I had not messed with those connectors before and was just winging it without instructions really…
All in all, a pretty nice $29 upgrade, especially if you have HID headlights.
All in all, a pretty nice $29 upgrade, especially if you have HID headlights.
#7
Trending Topics
#8
Nice,
Easy way is to turn the wheel to the left ( for the front left ) , then turn and remove the lower (bottom) disc, then you have access to the LED position bulb.
This is what the disc " Lid cover " look like.
Here is the back of the position light only housing:
Turn and twist out the base, then you can put in the Ziza LED bulb. Its polarity sensitive, so if it does not light the first time, turn it 180 degrees and you are gtg.
Same thing on the Fog light / position light housing. Top smaller bulb socket in picture is where the Ziza Position light LED goes. Main bulb is the fog light.
Repeat for the right hand side and you are good. Thanks and hope that helps.
Nice pics Stupolvo. Looks great.
Easy way is to turn the wheel to the left ( for the front left ) , then turn and remove the lower (bottom) disc, then you have access to the LED position bulb.
This is what the disc " Lid cover " look like.
Here is the back of the position light only housing:
Turn and twist out the base, then you can put in the Ziza LED bulb. Its polarity sensitive, so if it does not light the first time, turn it 180 degrees and you are gtg.
Same thing on the Fog light / position light housing. Top smaller bulb socket in picture is where the Ziza Position light LED goes. Main bulb is the fog light.
Repeat for the right hand side and you are good. Thanks and hope that helps.
Nice pics Stupolvo. Looks great.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#12
That's great and very cool for Austin.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#13
My lights flicker for about 5 seconds when I turn the car on... Is this normal, anyone else notice this?
#14
#15
#16
#17
#18
#19
Ziza Front Position LED Upgrade: Gen 2 MINI
https://www.northamericanmotoring.co...s-gen-2-a.html
&
For the lower fog light ( if you have that option ) you can use the Ziza H8 Bulbs. Those photos are without the Ziza Led position lights installed (stock position bulbs) and shot low to show the output of fogs with yellows Ziza H8.
https://www.northamericanmotoring.co...s-gen-2-a.html
MikewithaMini - post up some pics with the Ziza led / Ziza fogs if you can.
Also, Currently we are running a sale on the Ziza products. So click through to see the prices.
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#20
#21
Looks good. Thanks for the pics.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#22
Looks good. Thanks for the pics.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.
Yes, I shot it tight to show the postion lights and also not to reveal my clunky garage! Standing off, the Xenons and the Position/Position+fog match up pretty well without any issues whatsoever from the start. I guess I've had them a couple months now. Ziza is proud of the license lamps but that will be the next lighting I buy, probably.
#23
Great,
We have the lic plate lights here: R56 , R57 , R58 and R59 as well as Gen 1 R50 R52 R53 models.
http://www.ecstuning.com/Search/SiteSearch/ES2598621/
-----------------------------------------------
And the interior light kits here for the R56 platform:
For vehicles with production up to 8/2010 R56 LED Interior Lighting Kit
http://www.ecstuning.com/Search/SiteSearch/ES2568957/
&
For vehicles with production from 8/2010 R56 LED Interior Lighting Kit
http://www.ecstuning.com/Search/SiteSearch/ES2580513/
Both full install interior kits have install PDF instructions under documentation on the right hand side of the item page, just click on the links above.
These are currently on sale, plus free shipping on those kits.
Thanks
We have the lic plate lights here: R56 , R57 , R58 and R59 as well as Gen 1 R50 R52 R53 models.
http://www.ecstuning.com/Search/SiteSearch/ES2598621/
-----------------------------------------------
And the interior light kits here for the R56 platform:
For vehicles with production up to 8/2010 R56 LED Interior Lighting Kit
http://www.ecstuning.com/Search/SiteSearch/ES2568957/
&
For vehicles with production from 8/2010 R56 LED Interior Lighting Kit
http://www.ecstuning.com/Search/SiteSearch/ES2580513/
Both full install interior kits have install PDF instructions under documentation on the right hand side of the item page, just click on the links above.
These are currently on sale, plus free shipping on those kits.
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#25
Looks good. Thanks for the pics.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.
But I think you are getting the cutoff point on the xenon headlights in the lens reflection , which makes them look yellow. You can take a picture higher or lower and further back, if you want for a better angle. But the Ziza set up on the bottom looks good.