North American Motoring - Drivetrain Need How-To for Alta 2% crank shaft pully

North American Motoring (https://www.northamericanmotoring.com/forums/)

- Drivetrain (Cooper S) (https://www.northamericanmotoring.com/forums/drivetrain-cooper-s-16/)

- - Drivetrain Need How-To for Alta 2% crank shaft pully (https://www.northamericanmotoring.com/forums/drivetrain-cooper-s/71973-need-how-to-for-alta-2-crank-shaft-pully.html)

Need How-To for Alta 2% crank shaft pully

anyone with a link , instructions etc... just looking at how hard this is, or do i need to get someone to do it, if so , what would the cost be for the install of this mod?

It's easy!
--place car on a lift or jack stands
--Pull the right front tire and fender well
--Remove SC belt
--remove bolt on stock pulley
--use tool to pull off the stock pulley
--use the tool to press on the new CS pulley
--Install bolt on new pulley (not sure of torque?? Anyone with a bently??)
--make sure that the pulley is aligned with the other pulleys and belt
--intall SC belt
--Intall right front fender well and tire
--remove car from lift or jack stands
--Test op.

Hope that helps:thumbsup: -- Johan

I'm interested in this mod also. Would anyone know what specialty tools are involved and possibly their cost. Thanks Steve