https://cimg9.ibsrv.net/gimg/www.nor...6f17de1d5d.jpgOS GIKEN twin disc
https://cimg0.ibsrv.net/gimg/www.nor...a994635a63.jpgOS GIKEN twin disc https://cimg1.ibsrv.net/gimg/www.nor...a29c618f54.jpgOS GIKEN twin disc https://cimg5.ibsrv.net/gimg/www.nor...d1f8ccb4c2.jpgBorg Warner 7163 twinscroll https://cimg6.ibsrv.net/gimg/www.nor...d6936972d7.jpgBorg Warner 7163 twinscroll https://cimg9.ibsrv.net/gimg/www.nor...a46257cc3d.jpgOS GIKEN LSD https://cimg0.ibsrv.net/gimg/www.nor...bea5472d55.jpgready for it's new home https://cimg1.ibsrv.net/gimg/www.nor...eb7a16e409.jpgOS GIKEN LSD liking it's new home, wonder if it knows the abuse it's going to see? https://cimg2.ibsrv.net/gimg/www.nor...84e12f2d05.jpgAlways recommend changing all the parts out when installing an OS GIKEN Clutch if you want it to work like butter https://cimg4.ibsrv.net/gimg/www.nor...1bc807ad9b.jpgthe ugly east coast disaster of front subframe https://cimg3.ibsrv.net/gimg/www.nor...0b9d396d56.jpgand now to rebuilding it https://cimg4.ibsrv.net/gimg/www.nor...2cf5a47f79.jpgnew control arms and all steering parts https://cimg5.ibsrv.net/gimg/www.nor...fa8672974c.jpglooking much better https://cimg6.ibsrv.net/gimg/www.nor...cdc74f5357.jpgAST coilovers ready to go on, it has to turn as good as it goes in a straight line |
https://cimg4.ibsrv.net/gimg/www.nor...33f5641207.jpgSafety first, cage install
https://cimg5.ibsrv.net/gimg/www.nor...e7cdb601d8.jpgdiamond plate flooring https://cimg0.ibsrv.net/gimg/www.nor...85330123ca.jpgmust have the best seat belts , just in case https://cimg8.ibsrv.net/gimg/www.nor...596d4e5817.jpg https://cimg9.ibsrv.net/gimg/www.nor...9c60b415c2.jpg https://cimg3.ibsrv.net/gimg/www.nor...5e0386bf70.jpg https://cimg4.ibsrv.net/gimg/www.nor...343a2461b4.jpgCoil pack relocater, ECU holder and engine mounts powder coated https://cimg5.ibsrv.net/gimg/www.nor...b877a93b4f.jpgceramic coated 3" custom exhaust https://cimg6.ibsrv.net/gimg/www.nor...daded26cac.jpgpowder coated https://cimg7.ibsrv.net/gimg/www.nor...05838b863d.jpgcustom radiator with PWR core https://cimg8.ibsrv.net/gimg/www.nor...76e294bff0.jpgrubber mounted radiator brackets https://cimg9.ibsrv.net/gimg/www.nor...8d9763f9eb.jpgceramic coated downpipe https://cimg0.ibsrv.net/gimg/www.nor...a6d3cc9b36.jpgthe part most will be seeing........ |
https://cimg4.ibsrv.net/gimg/www.nor...08b0a3a8c9.jpgRMW billet dual fuel pump system
https://cimg6.ibsrv.net/gimg/www.nor...ccc05adf05.jpguses factory leveling sensors https://cimg9.ibsrv.net/gimg/www.nor...efa5ced0d2.jpg https://cimg0.ibsrv.net/gimg/www.nor...caf43d87b4.jpgfactory plug snaps on https://cimg1.ibsrv.net/gimg/www.nor...75f72527eb.jpg https://cimg3.ibsrv.net/gimg/www.nor...457dee6c57.jpgWalbro 450liter pumps (dual) 1200whp capable https://cimg8.ibsrv.net/gimg/www.nor...5c1c44c71b.jpgFIC1650cc injectors and RMW billet rail https://cimg9.ibsrv.net/gimg/www.nor...3dd5823bc7.jpg-8 feed line and -6 return https://cimg2.ibsrv.net/gimg/www.nor...fd56acedfe.jpg https://cimg4.ibsrv.net/gimg/www.nor...08bc85a1e3.jpg https://cimg6.ibsrv.net/gimg/www.nor...952475ed32.jpgeverything is securely mounted https://cimg7.ibsrv.net/gimg/www.nor...8545f35cf3.jpgfits like factory https://cimg8.ibsrv.net/gimg/www.nor...b0cc5381eb.jpg https://cimg9.ibsrv.net/gimg/www.nor...fcdb067219.jpg https://cimg0.ibsrv.net/gimg/www.nor...1061aec29c.jpg https://cimg1.ibsrv.net/gimg/www.nor...f430722941.jpg |
https://cimg6.ibsrv.net/gimg/www.nor...1ece417ab7.jpgplenty of space so everything works correctly
https://cimg7.ibsrv.net/gimg/www.nor...0773348625.jpg https://cimg8.ibsrv.net/gimg/www.nor...0410d29514.jpgtrick oil feed for turbo , everything is heat shielded https://cimg9.ibsrv.net/gimg/www.nor...8dfaa3bb01.jpgcooper water pump https://cimg2.ibsrv.net/gimg/www.nor...89b7a765cc.jpg https://cimg3.ibsrv.net/gimg/www.nor...bbfdd2b74a.jpgcustom crash bar w/vertical flow intercooler and oil cooler https://cimg4.ibsrv.net/gimg/www.nor...3bc7fba9cc.jpgRMW billet custom intake manifold https://cimg7.ibsrv.net/gimg/www.nor...1d7f17f458.jpgmaking some serious power on the dyno |
Facebook Post |
I am speechless. This has to qualify as the ultimate monster Mini porn post.
|
Originally Posted by pnwR53S
(Post 4381176)
I am speechless. This has to qualify as the ultimate monster Mini porn post.
|
Wow! That thing is a work of art.
|
:eek2:
YOWZA!!! I am jaw-dropped with an exploded brain and at a total loss for words. It is truly magnificent to the utmost degree. The level of precision and attention to detail is indeed mind-blowing --- SERIOUS BUSINESS --- very well done worldclass stuff indeed. I'm still a noob and have only recently purchased an R53 and just now getting to know things, but when I was doing my research RMW popped up on my radar as being the premier outfit for MINI tuning and now I see why you're so legendary and well-respected. Proper champion. :thumbsup: |
Excellent build thread Jan!
I've seen this car in person and the craftsmanship is every bit as good as the pics above suggest, and then some :thumbsup: Please remember, I would like a ride still..... :nod: :nod: |
Originally Posted by ThumperMCS
(Post 4381570)
Excellent build thread Jan!
I've seen this car in person and the craftsmanship is every bit as good as the pics above suggest, and then some :thumbsup: Please remember, I would like a ride still..... :nod: :nod: Just had it over to West End today to get it aligned so we are nearing the end on it Just need to get it back to finish up the E85 tune and you can have a ride. Might want to bring a diaper........:lol: |
I've wanted to do that to mine but have heard it causes a CEL and in the state of WA we can't get by the DOL with the CEL. What was the time line on the build Jan? That's beautiful workmanship and what a beast you created.
|
Is this car in San Francisco by any chance, just saw the yellow mini parked on the side of the road with the same exhaust tip.
Ben |
Ok, first things first. I give props to who ever owns this car and spent this kind of cash on it.
Here is the part everyone isn't going to like, the issues I see in this engine bay. (I'm actually OCD btw) https://cimg3.ibsrv.net/gimg/www.nor...9d46e592bd.jpg The power steering bottle is just jammed against the brake booster. The positive jump terminal is just hanging unsecured The coolant lines to the bottle are almost touching the down pipe which is unwrapped along with the turbine housing and header that are shown glowing red hot in one of the his pics. (also the ABS module and brake lines are unprotected from this heat) Turbo oil feed line is actually touching (or really really close) to the cowl panel and unprotected from the heat. A Jet-Hot style coating is not good protection against severe radiant heat. Open breather filter and PCV valve with a filter on it. (creating crankcase vacuum is needed for optimal ring seal) I'm guessing this engine bay is incomplete and there was still more work to be done after this pic? |
sometimes pictures are misleading, especially when you haven't seen it up close
the power steering pump isn't touching anything except the custom mount that's made for it the battery terminal is totally secured, doesn't move a lick having the PCV open to atmosphere along with the one that goes to the intake has nothing to do with the rings sealing (we have made over 750whp already without issues and the Chrysler engineer who made the engine agrees with me) Ask me why? I know him personally since he came out to my shop to see everything I had made for these engines. He has purchased all of my parts for his own personal engine which he just finished building. I've redesigned much of the engine which after 12yrs of people telling me I was wrong are now doing just what I said to do 12yrs ago.......... let that sink in As you have probably figured out by now, I rarely listen to people on the internet because if I did we would never be where we are today with the platform not sure why you can't see the fire sheath on everything anywhere close to hot parts which are 100% ceramic coated. Not one bit of melting on any of the hoses.......ZERO The only reason it was glowing red was because I was doing high load cell tuning on pump gas for multi minutes. The ceramic is fantastic compared to wraps I have used The highest quality race parts have been used on everything.....if you want to see OCD, hang out with me for awhile There are 2 things that aren't finished on the car...........special custom made DCI shielding for the brake lines and valve cover and changing the fuel hose from the extra inline fuel filter to fuel rail. It's what I had in the shop at the time and wanted to get it on the dyno for testing without having to wait. I've spent 3yrs on developing this kit, every single thing in it to make 600whp as reliably as it possibly can be done. This car will be daily driveable.........let that sink in for a moment Imagine daily driving a car that is 333hp per liter capable on a base engine designed for 110hp...... The fuel system is 100% custom, I've spent more $$$ on developing a fuel system capable of this power than some have spent on their cars. It's a full flex fuel system with dual pumps, custom pickups and hydramat to keep it from fuel starvation in high speed turns. I have built a plug N play harness that plugs into the ecu to monitor the essentials, fuel pressure, fuel temp, ethanol content, oil pressure/temp etc. You can run anything from 91 pump to 100% ethanol. The ecu will automatically adjust power and boost to the ethanol content in the tank. I've got more sensors and safety features in the car to help the owner realize something is not right before it's too late. Some features will shut it down if we have certain issues without any input from the driver. "big brother" is watching.. We have come a long ways since 2002 with these cars and we aren't done yet! Regardless, have fun with your Mini and if you think you can do better...........make it and put it up to the test of racing....... I love a challenge |
Thanks for posting up photos Jan!
|
There is this machine that you see people walking up to in shopping centers and it gives them money. You think if I walk up to one it will give me enough to set up Jan in my garage???????????
For a MINI there Just ain't nothing Better than RMW |
just a quick update............target reached......still more testing to go:nod:
https://cimg3.ibsrv.net/gimg/www.nor...40e243a6a0.jpg495 ft lbs of torque..............611whp |
things get interesting quick after ~3800RPM lmao! Planning on setting boost limit by gear, for traction purposes?!
|
Originally Posted by cornjuice
(Post 4393635)
things get interesting quick after ~3800RPM lmao! Planning on setting boost limit by gear, for traction purposes?!
yes sir ecu has boost by gear, boost by ethanol % and traction control by gear too. It's going to take some track time to iron it all out, may have to turn it down quite a bit in the lower gears |
Any cost numbers Jan? |
Snap!! Jan, can’t wait to work with you on my build.
|
Jan, you arn't hiring interns, just to learn, by chance are you? This work is incredible!
|
Originally Posted by ksminiman
(Post 4400348)
Jan, you arn't hiring interns, just to learn, by chance are you? This work is incredible!
honestly I don't have much time for free time as I do all of the engineering, run the business etc and sometimes wrench. My hours at the shop vary all the time. There was a few months were my shortest week was 80hrs and the longest was 122hrs.......joys of running your own business. Too many things on my plate as I move forward, as I have other makes/models of cars asking me to do projects for their brand. Some day it would be nice to have some interns but I just don't have enough time on my hands to train them |
All times are GMT -7. The time now is 08:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands