Drivetrain size resonator
#1
Join Date: Sep 2005
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
#5
the forum searches aren't the best.
on google.com use
"site:www.northamericanmotoring.com exhaust diameter"
its something around 2.1-2.2
easiest way is to take a string, wrap it around the pipe diameter, then do circumference = 2*diameter
Regardless, its not a standard size of 2" or 2.25", so you'll need a sleeve if you're welding an aftermarket resonator to a stock exhaust
on google.com use
"site:www.northamericanmotoring.com exhaust diameter"
its something around 2.1-2.2
easiest way is to take a string, wrap it around the pipe diameter, then do circumference = 2*diameter
Regardless, its not a standard size of 2" or 2.25", so you'll need a sleeve if you're welding an aftermarket resonator to a stock exhaust
The following users liked this post:
austin5 (04-10-2018)
#6
#7
Trending Topics
#8
#9
the forum searches aren't the best.
on google.com use
"site:www.northamericanmotoring.com exhaust diameter"
its something around 2.1-2.2
easiest way is to take a string, wrap it around the pipe diameter, then do circumference = 2*diameter
Regardless, its not a standard size of 2" or 2.25", so you'll need a sleeve if you're welding an aftermarket resonator to a stock exhaust
on google.com use
"site:www.northamericanmotoring.com exhaust diameter"
its something around 2.1-2.2
easiest way is to take a string, wrap it around the pipe diameter, then do circumference = 2*diameter
Regardless, its not a standard size of 2" or 2.25", so you'll need a sleeve if you're welding an aftermarket resonator to a stock exhaust
Thread
Thread Starter
Forum
Replies
Last Post