Jan's Connecticut Tuning Session Results
 

Jan's Connecticut Tuning Session Results Thread

Post your results here from this weekends Tuning Session at Bishops Motorsport in CT.

Saturday April 12th
Mark Bahna
AstroBlackS
Trippyloaf
1FSTMINI
Christopher Chabot
Uberfisch

Sunday April 13th
pbraun
greenmonster
Robr3004
Jeffc
grillhands
Ryan Laisic

Posted some information @ www.tshared.com

Like I said on NEMINI, did you get an explanation for that rather large dip at 3500RPM? I feel like I have never seen that before.

every mini i've seen dyno'd has that... Most dyno graphs start at 3500 however which is why you don't typically see it.

What dose he charge for the tune and will he be in the area again or down state NY area?

since Frank's car was an automatic, the best way they could get it to run consistent pulls was to start the test higher than the manual transmission cars:thumbsup:

Dynapaks pull the car to the "starting" rpm that you set on the computer
the car trys to ramp up but the dyno drags it down to that rpm then let's it go:nod:

Jan
How did everything work out in CT.

still have tomorrow to go:thumbsup:

so far... so good:wink:

I saw some smiles today:grin:

Trippy - Nice Numbers! Right up behind the GPs!

Just got back from work. :sad: Hope everything is going well today! I want to see some more numbers! :thumbsup:

That's the dyno being ramped up. the dip represents the start of recording, followed by the load being placed on the engine. It's just how a dynopak works :thumbsup:.

I ended up with 198/175.

Wait for Greenmonsters 44 WHP gain story lol

Sweet Jeff!

44whp?????????

I have to hear this. :popcorn:

It was Ryan from Maine....:eek2:

44whp increase... sorry gonna have to call unpossible on that one lol. :lol:

Couple Pictures from today:

http://minicooper.tshared.com/cttune/Thumbnails/1.jpghttp://minicooper.tshared.com/cttune/Thumbnails/2.jpghttp://minicooper.tshared.com/cttune/Thumbnails/3.jpghttp://minicooper.tshared.com/cttune/Thumbnails/4.jpghttp://minicooper.tshared.com/cttune/Thumbnails/6.jpg

I am with you on this one. The only mods were 15% pulley and CAI. Everything else stock.:lol:

:lol: :thumbsup:

I'm all ears...

haha. i was expecting you to say a mth tuner map on there as well. :eek: that's pretty sweet... i bet that guy is floored!

have to admit.... most insane car ever

I think he dumped nitro in the tank:razz:

I still can't believe it:eek2:

must have been the sunspots.... then again... there wasn't any sun :sly:

Wait 'til you come to Rochester, we're one of the top 10 cloudiest cities* in the US! :eek2:

*I think the report was for cities with at least 200k people, but still...your gonna see some pasty looking people!!!

Haha, well, you'll have sun in Florida this weekend :wink:.

44 hp. Everyone thinks they have a magic mini, but a few actually DO! Just a pulley with everything just stock, not even an exhaust. Umbelievable. Jan, what a good day! Kyle, you have some great people working for you. Everyone did what needed to be done to get the job DONE!

Thanks again to Jan, Bishops and the guys for the entertainment. Sorry, I didn't stay longer but I was functioning on 3 hours sleep and had a long ride ahead of me. The HP number is what excited me in CT but the torque is what blew my mind on the way home. The car pulled through the gears like there was no end. So with an incredible tune and a Red Sox win over the Yankees :lol: I will call April 13,2008 a very good day.

Craven 15% pulley
Ultrik CAI (the matching blue filter adds 20HP)
NGK 7EIX plugs

https://www.northamericanmotoring.co...dium/Dyno5.JPG