D Stock Hoosier 225/50/16
#1
#2
Yes, it can be done and they fit the wheel fine. The only issue you will find is that if you run stock wheels with no spacers, you will probably rub a lot on the strut in the front, and the control arm in the rear. In the rear, you can expect to rub on the fender liners as well. I've ran them with very minimal rubbing using 44 offset wheels.
Jake
Jake
Thread
Thread Starter
Forum
Replies
Last Post
OasisT
SCCA Solo and ProSolo
19
07-04-2005 10:19 PM