+35 offset fit on mini countryman??
#26
Have recieved many compliments on the look. those pics were also fresh down from being on jacks. Stock Suspension has settled since. but thank you for your compliment. and now we know the size will work on Stock none lowered suspension.
#29
#30
Awaiting Lowering Kit :-D
Last edited by Mister Spice; 05-15-2017 at 09:26 AM. Reason: adding pic
#31
Thanks! I came a cross an awesome deal on some slightly used KW V3's. Just rear control arms, otherwise. I don't think I'll need camber plates, but we'll see what happens.
My tires fit just inside the fender, where it looks like your fenders seem to be a bit over the tread. So, I'd be wary about how much drop I put on it. I rub on the fenders every now an then under hard cornering. I also have since raised the front about 1/8 inch to reduce that. Prior to that, it was rubbing a lot on hard corners.
This is the second set of KW's I've had, once before on a Bimmer I had. I like them a lot. Give a great, tight feel but not harsh in any way. Now I've never driven on any other CO's. So, I can't say how they are different.
I wish KW made the V1's for the R60, though. I don't need V3's, much more suspension that what is necessary for me. But I got them at the price of the V2's. So, it was hard to argue against it.
My tires fit just inside the fender, where it looks like your fenders seem to be a bit over the tread. So, I'd be wary about how much drop I put on it. I rub on the fenders every now an then under hard cornering. I also have since raised the front about 1/8 inch to reduce that. Prior to that, it was rubbing a lot on hard corners.
This is the second set of KW's I've had, once before on a Bimmer I had. I like them a lot. Give a great, tight feel but not harsh in any way. Now I've never driven on any other CO's. So, I can't say how they are different.
I wish KW made the V1's for the R60, though. I don't need V3's, much more suspension that what is necessary for me. But I got them at the price of the V2's. So, it was hard to argue against it.
#34
#35
Thanks! I came a cross an awesome deal on some slightly used KW V3's. Just rear control arms, otherwise. I don't think I'll need camber plates, but we'll see what happens.
My tires fit just inside the fender, where it looks like your fenders seem to be a bit over the tread. So, I'd be wary about how much drop I put on it. I rub on the fenders every now an then under hard cornering. I also have since raised the front about 1/8 inch to reduce that. Prior to that, it was rubbing a lot on hard corners.
This is the second set of KW's I've had, once before on a Bimmer I had. I like them a lot. Give a great, tight feel but not harsh in any way. Now I've never driven on any other CO's. So, I can't say how they are different.
I wish KW made the V1's for the R60, though. I don't need V3's, much more suspension that what is necessary for me. But I got them at the price of the V2's. So, it was hard to argue against it.
My tires fit just inside the fender, where it looks like your fenders seem to be a bit over the tread. So, I'd be wary about how much drop I put on it. I rub on the fenders every now an then under hard cornering. I also have since raised the front about 1/8 inch to reduce that. Prior to that, it was rubbing a lot on hard corners.
This is the second set of KW's I've had, once before on a Bimmer I had. I like them a lot. Give a great, tight feel but not harsh in any way. Now I've never driven on any other CO's. So, I can't say how they are different.
I wish KW made the V1's for the R60, though. I don't need V3's, much more suspension that what is necessary for me. But I got them at the price of the V2's. So, it was hard to argue against it.
#36
Just additional photos for 34 or 35 offset on an R60. Set up is 225/45 18x8 ET34 5x120, OZ Allegrita HLT with Michellin Primacy MXM4 MOE on stock suspension. I think the key is to keep the width tight so that it doesn't stick out much, if that's the look you're aiming for, i.e. 225 and 8" width. Quite happy with it, beefier but not too beefy look.
#37
#38
Did you had to do any rework on the fenders to make them fit and if not, is there any rubbing?
Thread
Thread Starter
Forum
Replies
Last Post
thebestbear
Tires, Wheels, & Brakes
1
03-28-2011 05:40 AM