Chicago area repair shop recommendation
I had some work done at Axels Automotive in Lake Bluff this summer (leaky power steering pump, and removing some frozen bolts holding on my skid plate).
I was very happy with both their price and service.
I am taking my 2nd MINI there tomorrow for new camber plates to fix my cracked one.
I was very happy with both their price and service.
I am taking my 2nd MINI there tomorrow for new camber plates to fix my cracked one.
Last edited by ernesto; Dec 29, 2008 at 03:43 PM. Reason: fixed link
Import Service in Glenview can take care of anything and the owner is a really nice guy with good pricing, he also drives a cooper S. www.importservicecenterinc.com is the web address.
The Rover Shop
I just had Glen at the Rover Shop in Lake Villa do some work on my MINI, wheel hubs and control arm bushings (Ireland Urethane).
He was easy to work with, informative and delivered my car cleaned (inside and out).
He charged me quite a bit less the the dealer quoted me, I probably saved over $500!
Here is a link to his website: http://www.therovershopinc.com/cooper.html
Bennett
He was easy to work with, informative and delivered my car cleaned (inside and out).
He charged me quite a bit less the the dealer quoted me, I probably saved over $500!
Here is a link to his website: http://www.therovershopinc.com/cooper.html
Bennett
good experience at EuroQuipe in the western suburbs
Had an H-Sport 19mm rear sway bar installed on my R56 at EuroQuipe in St. Charles today ... Kurt did the tech work, fast and easy; Brad is the guy out-front to talk to -- reasonable on the labor costs, too
Last edited by basil49; Sep 15, 2009 at 10:05 AM. Reason: add link to shop
Import Service in Glenview can take care of anything and the owner is a really nice guy with good pricing, he also drives a cooper S. www.importservicecenterinc.com is the web address.
I use import service center and the owner there is a great guy.
They do a good job and have a reasonable price.
Most important Dan (the owner) owns and drives a Mini
Also in June, Way Motor Works was there installing performance upgrades, so this shop has a commitment to Minis and knows what they are doing
+1
I use import service center and the owner there is a great guy.
I use import service center and the owner there is a great guy.
Just had a set of tires for my Subaru mounted there this morning.
Trending Topics
+3 for Import Service as well..
for all Cabrio (R52) owners... if you need your top repaired (won't open bc cable assembly broke) and you're out-of-warranty... call Hubbard Woods Motors in Winnetka - 847-446-0711. ask for Tad and tell him Francis sent you. very happy with the results
for all Cabrio (R52) owners... if you need your top repaired (won't open bc cable assembly broke) and you're out-of-warranty... call Hubbard Woods Motors in Winnetka - 847-446-0711. ask for Tad and tell him Francis sent you. very happy with the results
Another shop to consider is VFC Engineering. They are located 4657 N. Ravenswood, just a couple of blocks North of Montrose. This shop specializes in Porsche, Audi, BMW & VW and is branching out to include Mini & Rover.
Banned
iTrader: (2)
Joined: Oct 2005
Posts: 3,499
Likes: 0
From: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
Last edited by MLPearson79; Jan 4, 2010 at 02:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Steeroidz
R50/R53 :: Hatch Talk (2002-2006)
4
Aug 29, 2018 07:41 AM
theateist
General MINI Talk
5
Aug 22, 2015 06:58 AM
bc219
R50/R53 :: Hatch Talk (2002-2006)
13
Aug 10, 2015 11:22 AM




