TCE Wilwood 12.2" kit -For Sale
Thread Starter
|
2nd Gear
Joined: Sep 2006
Posts: 58
Likes: 0
TCE Wilwood 12.2" kit -For Sale
This is the TCE Plus 1 kit with the 12.2" rotor - a full race kit in other words, not a street kit. No rubber in the caliper. The rotor vane design and the pistion components are different from street kits.
The kit comes with set of BP20 street pads and a set of Polymatirx B pads for the track - kind to rotors with awsome stopping power.
Two sets of rotors; one slotted set (Brand New) and one solid set. The solid set is currently mounted to the hats and safety wired. New hats are required if you want to use the slotted rotors - hats should not be re-used more than twice according to Todd.
The street pads have about 2/3rds pad left and the Poly Bs have only been used once.
$600 plus shipping...should be around $30-$40 to ship with the rotors.
The mounting hardware is virtually new; it was used for about a week.
PM me
Ben
The kit comes with set of BP20 street pads and a set of Polymatirx B pads for the track - kind to rotors with awsome stopping power.
Two sets of rotors; one slotted set (Brand New) and one solid set. The solid set is currently mounted to the hats and safety wired. New hats are required if you want to use the slotted rotors - hats should not be re-used more than twice according to Todd.
The street pads have about 2/3rds pad left and the Poly Bs have only been used once.
$600 plus shipping...should be around $30-$40 to ship with the rotors.
The mounting hardware is virtually new; it was used for about a week.
PM me
Ben
Last edited by habanero2002; May 4, 2008 at 04:07 PM. Reason: pics
Thread Starter
|
2nd Gear
Joined: Sep 2006
Posts: 58
Likes: 0
Located in Milwaukee, WI 53202. Pictures coming soon. I need to dig them out of the garage. Im moving so things have been moved around by the misses. Brakes have been off the car since September. I ran them for a few months then switched rims and they did not fit. I went back to stock rims.
Ben
Ben
Last edited by habanero2002; May 1, 2008 at 06:56 AM.
1st Gear
Joined: Apr 2007
Posts: 16
Likes: 0
From: Six Mile, SC
reason for sale?
Is there a particular reason for sale? I was reading on the TCE website and they did not mention the fact that they are just for the track unless they have the upgraded rotors (thicker). If they are street-able, I am very interested...
David
David
Thread Starter
|
2nd Gear
Joined: Sep 2006
Posts: 58
Likes: 0
Reason for sale is im running stock 16's and they do not fit. The kit is awesome and I ran them on the street for 4000 miles. the reason they are a race kit is there is no seals on the caliper and the piston is stainless. since I live in wisconsin, I took them off in October because of the salt on the roads and I did not want any corrosion. They have been in a box ever since. Whoever ends up with these will not be disappointed. Check with Todd at TCE for fitment questions.
Ben
Ben
Trending Topics
4th Gear
Joined: Jan 2007
Posts: 397
Likes: 0
From: Concord CA
i pmed you, i really want tem, but id have to make sure they fit. my dad has the 13.2(?) willwoods i think and i can almost fit them on my 15" 949 racing wheels so im pretty sure these would fit but im not 100%
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
28
Dec 23, 2015 10:36 AM
wheresaldo
MINI Parts for Sale
5
Oct 23, 2015 10:17 AM