Bimmercode App
#102
05-14-2018, 04:41 PM
What I'm trying to figure out is if "coded the indicators in the basic mode - to not monitor and set to LED" does something different than the steps listed for expert mode... and what those different toggles are.
I suspect the basic mode steps are at minimum hitting FRA_H_L_IS_LED and FRA_H_R_IS_LED (left and right rear turn signals), but I don't know what else is being done, as it's not a very specific list.
#103
05-14-2018, 04:46 PM
#104
05-14-2018, 04:49 PM
#105
05-14-2018, 04:51 PM
That's why I need whole thing in terms of expert mode toggles.
#106
05-14-2018, 09:20 PM
Well, that's what I'm trying to find out – the specific parameters that "Coded the indicators in the basic mode - to not monitor and set to LED" translates to.
I don't even have basic mode. I have ESYS (the original "expert mode").
That's why I need whole thing in terms of expert mode toggles.
I don't even have basic mode. I have ESYS (the original "expert mode").
That's why I need whole thing in terms of expert mode toggles.
They equate to e-sys commands.
Do not change short circuit.
#107
05-14-2018, 09:42 PM
#108
05-14-2018, 09:49 PM
FRA_H_L[R]_IS_LED => aktiv
FRA_H_L[R]_WARMUEBERWACHUNG => nicht_aktiv
FRA_H_L[R]_KALTUEBERWACHUNG => nicht_aktiv
Right? Nothing else from the 'basic mode' step?
-------
What about BFD_L[R]_IS_LED (et. al.)?
Right now that's set as 'nicht_aktiv' with my stock tail lights ... shouldn't that be modified to LED as well with the new ones?
#109
05-15-2018, 05:45 AM
Ok, so "Coded the indicators in the basic mode - to not monitor and set to LED" means:
FRA_H_L[R]_IS_LED => aktiv
FRA_H_L[R]_WARMUEBERWACHUNG => nicht_aktiv
FRA_H_L[R]_KALTUEBERWACHUNG => nicht_aktiv
Right? Nothing else from the 'basic mode' step?
-------
What about BFD_L[R]_IS_LED (et. al.)?
Right now that's set as 'nicht_aktiv' with my stock tail lights ... shouldn't that be modified to LED as well with the new ones?
FRA_H_L[R]_IS_LED => aktiv
FRA_H_L[R]_WARMUEBERWACHUNG => nicht_aktiv
FRA_H_L[R]_KALTUEBERWACHUNG => nicht_aktiv
Right? Nothing else from the 'basic mode' step?
-------
What about BFD_L[R]_IS_LED (et. al.)?
Right now that's set as 'nicht_aktiv' with my stock tail lights ... shouldn't that be modified to LED as well with the new ones?
Funny you mentioned BFD.
No one has brought that up, not even me!!
I failed to mention that I went ahead and coded the BFD
to LED when I swapped my bulbs to LED. Long before I
Started coding for BFD.
SoI can’t tell you it needs to be done, but it didn’t hurt to do it.
FIY I’m not using UJ lights. I’m using LED Euro tai lights ( amber turn signals)
Did a swap for LED brake and turn signal bulbs months ago. As only the running lights were LED rung.
Last edited by TVPostSound; 05-15-2018 at 05:52 AM.
#110
05-15-2018, 08:52 PM
Rear Fog coding
I was able to code my rear fogs to work as brake lights. But somehow I messed something up and now the main brake light o my lights up the lower part and not the full circle. I have factory led.
#111
05-17-2018, 04:48 AM
Help, anyone?
Last edited by JosephM635; 05-17-2018 at 06:18 PM.
#112
05-17-2018, 09:01 AM
When you say circle, I think the LED which is the running light, not brake light.
Brake lights have upper and lower bulbs.
#113
05-17-2018, 06:24 PM
#114
05-17-2018, 07:10 PM
#115
05-22-2018, 02:50 PM
Newbie here when it comes to Bimmercode, please be patient with me.
i just got my Vgate Bluetooth and tried Bimmercode code just the basic function, did not even tried the “Expert” yet.
My question is when I tried to code my changes, it ask for $26.99 for unlocking code. My understanding is, this is just for my changes to take effect on my Mini F60. is this correct ? And do I need to pay additional if I go play around in “Expert Mode”.
Feedback will be appreciated. Thanks in advance.
i just got my Vgate Bluetooth and tried Bimmercode code just the basic function, did not even tried the “Expert” yet.
My question is when I tried to code my changes, it ask for $26.99 for unlocking code. My understanding is, this is just for my changes to take effect on my Mini F60. is this correct ? And do I need to pay additional if I go play around in “Expert Mode”.
Feedback will be appreciated. Thanks in advance.
#116
05-22-2018, 02:55 PM
OVERDRIVE
#117
05-22-2018, 04:16 PM
#119
06-19-2018, 10:04 AM
1st Gear
#120
06-19-2018, 11:13 AM
Interesting thought. Im not sure if thats an option.
I coded mine as a 3rd set of brake lights. I figured I'd get more use out of them that way. I rarely turn my fogs on
#124
06-24-2018, 12:29 PM
The shortcuts to those functions are no longer viable.
They are shortcuts to expert mode, you can always go in expert mode,
and reset your preferences.
There should be instructions at the beginning of this thread.
#125
06-25-2018, 08:12 AM
the problem is the areas are grayed out and you cant even click them to go into expert mode...