North American Motoring - facelift ECU running in PFL car with a TVS900, 550's and BVHEAD

North American Motoring (https://www.northamericanmotoring.com/forums/)

- 1st Gear (https://www.northamericanmotoring.com/forums/1st-gear-114/)

- - facelift ECU running in PFL car with a TVS900, 550's and BVHEAD (https://www.northamericanmotoring.com/forums/1st-gear/351380-facelift-ecu-running-in-pfl-car-with-a-tvs900-550s-and-bvhead.html)

facelift ECU running in PFL car with a TVS900, 550's and BVHEAD

In the never ending quest for more HP and all around diving pleasure I now have a facelift ECU that was plug and play in my 2004 JCW with a built short block, BVHead, p3/4 cam, 550's AND the TVS900 65mm currentlywith 55mm to come!

Thank you Nastase Adrian you are a hero! Everyone said it couldn't be done but, its in and running. I hope to have the highest HP car that still has cruise control/factory ECU. The facelift ecu with the same tune that you sent is so much more responsive and, midrange is just better!

If you need a tune you should reach out to him!

Dyno to come when I can get the 55mm pulley on and the 3 bar MAP sensor.
https://cimg7.ibsrv.net/gimg/www.nor...f655f5600c.jpg

Welcome and excited to see what it puts down.

Can’t wait to see what it puts down in the factory issue. I’ve only heard good things about Adrian.