 |
 North American Motoring |
Sign in using an external account
|
|
| Welcome to North American Motoring ! |
 |
|
Welcome to North American Motoring,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
|
|
>
|
>>
|
|
Reviews
|
Views
|
Date of last review
|
|
2
|
17282
|
2/6/2009
|
|
|
Recommended By
|
Average Price
|
Average Rating
|
|
50% of reviewers
|
None indicated
|
4.5
|
|
|
|
supersize
|
|
Description:
|
This replacement coil intensifies the spark output of your ignition, helping your air/fuel intake charge burn more completely. This is especially good for cars with smaller supercharger pulleys and other upgrades. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring but the four copper sleeves in the corners will need to be drilled out about 1/16" to allow for the stock studs to fit. It is a good idea to use higher quality plugs and ignition wires with this coil pack. Please check out our Kingsborne wires and Berur and Denso spark plugs.
SPECS: Maximum Voltage: 36,000 volts; Primary Resistance: .051 ohms; Secondary Resistance: 12K ohms; Inductance: 7 mH; Turns Ratio: 77:1.
Fits these MINI models:
02-06 Hatchback
04-08 convertible
|
|
Keywords:
|
msd ignition coilpack
|
|
Web site:
|
http://www.outmotoring.com/mini-coop...tion_coil.html
|
|
|
|
970S
Neutral
Registered: November 2008
Location: Mesa AZ
Posts: 7
|
|
Review Date: 12/22/2008
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 8
|
|
Pros:
|
Eliminated flat spot just after cold start
|
|
Cons:
|
Not a true 'bolt on' accessory, Needs better description of installation requirements
|
|
The four stock bolts that are removed from the stock coil pack have sleeves secured around them and are too large to install in the MSD unit. Some have suggested that the MSD coil pack mounting holes be drilled out. I disagree; find the correct size metric stainless Allen bolts at the hardware store and use them. Drilling out the MSD coil pack will weaken the mountings points.
|
|
rclements
2nd Gear
Registered: May 2005
Location: CANOGA PARK
Posts: 84
|
|
Review Date: 2/6/2009
|
Would you recommend the product? No |
Price you paid?: None indicated
| Rating: 1
|
|
Pros:
|
|
|
Cons:
|
sleeves too brittle to drill reliably.
|
|
sleeves too brittle to drill reliably. cracked two of the four. Bottom of sleeve copper is reinforced and will not drill without extraordinary force.
Get the right screws as 970S recommended.
|
|
|
|
|
| Users |
111,717 |
| Products |
445 |
| Reviews |
978 |
| Views |
7,736,077 |
|
Random Products - Ignition
|
Screamin Demon Coil pack
WayMotorWorks
|
Out Motoring Out Motoring Ignition Upgrade
OutMotoring
|
|
Way Motor Works
|
112,449 |
|
Alta Performance Col...
|
103,318 |
|
Cooper Flags
|
97,505 |
|
Coast to Coast USA
|
97,088 |
|
Burger Motorsports
|
96,451 |
|
Out Motoring MINI Af...
|
95,543 |
|
Cooper Gear
|
94,247 |
|
American Mini Mates
|
93,108 |
|
ALTA MINI Performanc...
|
92,248 |
|
brownflyer
|
90,936 |
|
Coopersport.com
|
79,814 |
|
Aesthetic Creations
|
78,290 |
|
Pilo Racing Mini Coo...
|
74,540 |
|
Whalen Machine
|
69,248 |
|
MINCORSA
|
66,721 |
|
Do It Yourself Hot A...
|
66,232 |
|
Palo Uber Mini
|
59,728 |
|
Helix Minisports Hel...
|
53,372 |
|
DDMWorks R56 Race In...
|
49,024 |
|
DDMWorks R56 Street ...
|
48,230 |
|
Craven Speed
|
47,569 |
|
Palo Uber CARBON FIB...
|
47,483 |
|
AutumnRiders
|
46,382 |
|
Euro Styles East
|
46,213 |
|
Mini Works
|
46,075 |
|
|
Powered by: ReviewPost PHP vB3 Enhanced
Copyright 2006 All Enthusiast, Inc.
|
 |
