|
>
|
|
Reviews
|
Views
|
Date of last review
|
|
6
|
5769
|
9/15/2008
|
|
|
Recommended By
|
Average Price
|
Average Rating
|
|
67% of reviewers
|
None indicated
|
7.2
|
|
|
|
supersize
|
|
Description:
|
The M7 strut tower brace is finally here.
Sporting hard anodized aluminum with a titanium color, our strut tower brace is complete with a profile that will clear the stock airbox & ECU, leaving you with a modification-free installation.
The strut tower plate is 13mm thick to add extra strength to the strut tower. The strut tower brace's modular design will allow easy access to oil filter or any other accessories that might normally be blocked.
Please note: Currently the M7 Strut Tower Brace is for the Cooper S only.
|
|
Keywords:
|
STB, Strut Tower Bar, brace
|
|
Web site:
|
www.m7tuning.com
|
|
|
|
lexlow
3rd Gear
Registered: January 2006
Posts: 267
|
|
Review Date: 1/17/2006
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
great piece.
|
|
patgoeglein
2nd Gear
Registered: January 2006
Location: Los Angeles / Calabasas
Posts: 140
|
|
Review Date: 3/23/2006
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
very tight steering...
|
|
Cons:
|
you have to cut out part of the insulation of the bonnet
|
|
I just installed the M7 strut brace and it only took about 3/4 of an hour. The most time was spent cutting the insulation out of the bonnet and then recoloring the cut out insulation.
I had heard the bonnet gets pressed up with the brace. This is not what I wanted so I waxed the brace and then shut the bonnet to mark the outline. Then I took a razor knife and cut the insulation out around the mark.
This left a white cutout that looked terrible so I got some black shoe polish and stained the remaining insulation to match.
Now the bonnet shuts perfectly and once opened you can hardly tell i had to mod the car at all to get the brace to fit.
|
|
goaljnky
6th Gear
Registered: February 2005
Location: As far away from Florida as I can get.
Posts: 4056
|
|
Review Date: 8/3/2007
|
Would you recommend the product? No |
Price you paid?: None indicated
| Rating: 1
|
|
Pros:
|
none
|
|
Cons:
|
does nothing
|
|
Even though the vendor knows about fitment issues, they refuse to mention it until after you pay them the money. Than they nonchalantly tell you to cut a piece of your car out. Something that would be nice to know prior to the purchase. Deceptive and underhanded.
|
|
rjgsphinx
1st Gear
Registered: October 2006
Location: Marietta, GA
Posts: 17
|
|
Review Date: 3/17/2008
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 8
|
|
Pros:
|
Protection of the Strut tower and tighter front end
|
|
Cons:
|
Lost hood insulation
|
|
Good mod and will help prevent the mushrooming you see after a hard hit. Wish you did not have to lose some insulation to get the hood to have no swell.
|
|
PGT
Coordinator :: Capital Area MINI Modders
Registered: May 2006
Location: DC Metro
Posts: 7170
|
|
Review Date: 6/9/2008
|
Would you recommend the product? No |
Price you paid?: None indicated
| Rating: 4
|
|
Pros:
|
looks nice when new
|
|
Cons:
|
looks horrible due to the hoodliner leaving deposits
|
|
The M7 STB....one of the best products M7 makes. It bulges your hood. It looks nice until the hoodliner leaves water deposits on it. It claims to protect the strut tops from mushrooming - mine when on the day the car came home yet when I removed it to sell, I had a slightly bulged shock mount.
|
|
Eurothrasher
4th Gear
Registered: May 2008
Location: South Shore, MA
Posts: 323
|
|
Review Date: 9/15/2008
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
A+ Quality, Fitment and Function
|
|
Cons:
|
No Neg Aspects
|
|
I have used STB's in all my sport hatch cars since my first brand new 83' VW GTi. The M7 is an excellent quality unit and has factory look, fit and finish. Cornering is somewhat tighter on off/on ramps, and I now have the added protection from Strut Tower Mushrooming. A 2-fer.
When I installed it, I did the soak and slam method. Follow Install Instructions which say NOT to cut anything. After the engine heats up, preferably on hot day, Soak the heck out of thebonnet liner area with distilled water, cover the STB with some thick plastic covering, and close the hood, leave it overnight. Eventually the bonnet liner will shape itself to the STB......Not sure why ANYONE is cutting anything. I would remove the liner before ever cutting it......????
|
|
|
|
|
| Users |
57,779 |
| Products |
306 |
| Reviews |
523 |
| Views |
1,516,788 |
|
Random Products - Strut and Stress Bars
|
MINI-Madness OMP Adjustable Strut Tower Stress Bar
YakiMini
|
M7 Strut Tower Brace
mdsbrain
|
|
Alta Performance Col...
|
35,639 |
|
Do It Yourself Hot A...
|
26,327 |
|
Pilo Racing Mini Coo...
|
22,189 |
|
Out Motoring MINI Af...
|
20,513 |
|
Webb Motorsports
|
17,429 |
|
Whalen Machine
|
16,343 |
|
Webb Motorsports Web...
|
15,251 |
|
R Speed Mini Cooper ...
|
15,142 |
|
Webb Motorsports Uni...
|
15,095 |
|
Helix Minisports Hel...
|
14,946 |
|
Alta Performance 15%...
|
14,324 |
|
MINI Aero Grill Kit
|
14,291 |
|
MTH-Motorentechnik H...
|
13,265 |
|
H-Sport Competition ...
|
12,386 |
|
Palo Uber CARBON FIB...
|
12,303 |
|
Cooper Flags Side st...
|
12,153 |
|
Craven Speed Craven ...
|
11,967 |
|
MINCORSA
|
11,769 |
|
CAI w/ TGI filter /...
|
10,984 |
|
Yokohoma AVS ES100
|
10,967 |
|
Whalen Machine Whale...
|
10,899 |
|
Palo Uber Mini
|
10,709 |
|
Out Motoring 2005 Mi...
|
10,683 |
|
Out Motoring ARC Arm...
|
10,594 |
|
Zaino Zaino Total Pr...
|
10,574 |
|
|
