You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Looking for more rigidity in your R53 chassis??
When MINI launched the cabrio they needed to add
some strengthening to make up for the missing
roof. Their solution was these b ...
The OEM rubber bushing is toast by 75K more or
less. Not replacing this bushing will lead to bad
tire wear, wheel bearing issues, vibration in
corners and under braking. Spend ...
Sneed's Speed Shop is proud to introduce our
custom designed roll bar for the R53 MINI Cooper.
We just recently installed the final prototype in
our MINI Cooper with great res ...
With more MINI Cooper S owners keeping or buying
high mileage R53’s the Eaton M45 Supercharger will
need service sooner or later.
AutoXCooper has partnered with a proven M ...
We all know how much the Stock OEM mount MINI
starting using in Dec 2003 and later R53/52/50
Motor Mount SUCKS!
After helping TSW get this back on the front
burner and mont ...
First, for background, I like my car to have a
rigid platform and soft suspension, attached
through reasonably firm bushings. My suspension
currently has Koni FSD's, urethane ...
The FlexPod mounting bracket attaches to the back
of the Tachometer on any second generation Mini.
Once in place, it provides open mounting points at
the bottom corners of the ...
The ALTA R56 Front Mounted Intercooler goes hand
and hand with other performance upgrades on your
2007 Mini Cooper S. While MINI was kind enough to
install a factory intercoo ...
Thumper Ported Head $1195.00
Heads are pressure tested, cleaned and ready to
install. Be make sure your work area is 100% clean
before unpacking and installing your new
inves ...
I've tried another well-known strut bar on my
MINI, and found only minimal improvements from it.
I've even tried to measure the interaction between
the wheels and a strut brac ...
ScanGaugeII is a three-in-one scan tool/trip
cpu/digital gauges. It allows you to re-set and
erase codes from OBDII & CAN. It can display up to
four yes four digital gauges at ...
The Moss Mini front license plate mount is
well-designed. It holds the plate parallel to the
bumper, and you have three choices of height for
the mount. The plate mounts into ...
