You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
To answer the questions all (or maybe some) of you were wondering, yes Helix will be doing installs at MOTD this year. We will be installing almost anything you need (except very time consuming things like TurboKompressors or clutches).
We are currently taking apointments for Wednesday-Friday. For Thursday there will be slots open at 10am, Noon and 2pm. For Friday there will be slots at 10,12,2 and 4pm. We will have 4 guys that can work on cars at the Dragon, so we can double up alot of the slots. We will make add some slots on Wednesday once these fill up, but remember alot of the slots can be doubled up.
Just fill in the slot you want and the part you want installed.
__________________ 2005 MCSC: LSD, Aerokit, Alta CAI and 15%, Magnaflow Catback, Hawk Ceramics, TSW XBrace chassis brace, Kosei K1's w/ Goodyear F1 GS-D3's 1969 Westerly Cirrus: Kappa sails, 155% genoa :-) , CDI roller furl/reef, Yamaha 4 stroke, Interlux Polyurethane, West system Epoxies and glass. MYMINI in a TV Commercial! The "Making of" the commercial :-)
Interested in your 12PM Friday slot for a clean installation of a switch for our driving lights. The lights are physically installed on the front of the car and the harness/relays are installed cleanly under the hood, but we held off on the through-the-firewall wire run and switches until we could find something better than the chintzy stick-on switches that came with the IFP lights. We need an acceptable switch(es) and the install finished.
There is an open space on the toggle switch panel. Haven't found a matching switch that will go there, though.
Thanks,
Roz and Lor Kutchins 484-356-6405
__________________ Roz K "SIR BUZZ"
06 MCS JCW RG/RG
Philly Mini
I sent another e-mail earlier but I'm not sure it went out. A few more questions:
1. What are the remaining install dates at the Dragon with Day/Times?
2. How long does the install of Pulley/Intake take?
3. Do you accept Credit/Debit cards?
__________________ 2004 MCS -IB/W - (Blew By U), Helix 15% pulley, Helix CAI, M7 strut brace, M7 OCC, M7 Ultimate Grills, M7 Air Diverter, H Sport 25.5mm Rear Sway Bar, H Sport Lower Control Arms, TSW Springs, TSW Slotted Disc Brakes, TSW Engine Damper - V2, Hawk Ceramic Brakes, Jackson Racing Wires, MSD Coil Pack, JCW , Magnafow Exhaust, Alta IC air diverter w/H2O, RMW JAN Tune...Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
I can do install an exhaust for you, however I dont have one in stock and wont be able to get one by tomorrow when we leave. If you are bringing your own exhaust, I will be more then happy to install it for you.
Alex
__________________
Alex McKenzie www.helix13.com
267 335 4337
Ok, thanks Alex. I don't have one but want one. Do you have any recomendations? Thanks.
See you on Friday
Frank
__________________ 2004 MCS -IB/W - (Blew By U), Helix 15% pulley, Helix CAI, M7 strut brace, M7 OCC, M7 Ultimate Grills, M7 Air Diverter, H Sport 25.5mm Rear Sway Bar, H Sport Lower Control Arms, TSW Springs, TSW Slotted Disc Brakes, TSW Engine Damper - V2, Hawk Ceramic Brakes, Jackson Racing Wires, MSD Coil Pack, JCW , Magnafow Exhaust, Alta IC air diverter w/H2O, RMW JAN Tune...Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
__________________ 2004 MCS -IB/W - (Blew By U), Helix 15% pulley, Helix CAI, M7 strut brace, M7 OCC, M7 Ultimate Grills, M7 Air Diverter, H Sport 25.5mm Rear Sway Bar, H Sport Lower Control Arms, TSW Springs, TSW Slotted Disc Brakes, TSW Engine Damper - V2, Hawk Ceramic Brakes, Jackson Racing Wires, MSD Coil Pack, JCW , Magnafow Exhaust, Alta IC air diverter w/H2O, RMW JAN Tune...Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
Sorry for the delayed response there. The Milltek catback is my personal favorite. Im sure there will be plenty of people at the Dragon with it on their cars.
Sadly, i won't be bringing and exhausts with me. Both of our suppliers, Milltek and Borla, have been out of stock for alittle while now. They don't expect more exhausts to be ready for another 3-4 weeks.
__________________
Alex McKenzie www.helix13.com
267 335 4337
and a lowriding Basset Hound named Farley
2004 MCS -IB/W - (Blew By U), Helix 15% pulley, Helix CAI, M7 strut brace, M7 OCC, M7 Ultimate Grills, M7 Air Diverter, H Sport 25.5mm Rear Sway Bar, H Sport Lower Control Arms, TSW Springs, TSW Slotted Disc Brakes, TSW Engine Damper - V2, Hawk Ceramic Brakes, Jackson Racing Wires, MSD Coil Pack, JCW , Magnafow Exhaust, Alta IC air diverter w/H2O, RMW JAN Tune...Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
