You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I checked "Real OEM" and the part numbers for the struts are different. I used 1/2002 and 1/2006 build dates for example when checking for part numbers. I know the internals are slightly different, changed in late '04 I believe, but I'm not sure on the externals.
Perhaps some one with more knowledge can let you know for sure. I'm guessing they'll be compatible.
In keeping with compatibility and why I think they'll fit, in another post but I'm not sure where, it was said that the JCW R56 rear bar will fit the R53. Go here for info: http://minspeed.net/JCWRSB.htm
Would shocks/struts and rear sway bar from an 06 fit and 02?
Thanks
Yuppers. As long as the '02 has a build date of March 2002 or newer they are 100% compatible. The dampers on the '06 are noticeably softer than the '02's, however most '02 dampers are getting close to being blown out by now.
Since it came up (and the OP question got answered), this reminds me:
Quote:
Originally Posted by Ryephile
however most '02 dampers are getting close to being blown out by now.
Typically how long do the OEM struts last? Obviously this depends on roads / track usage / driving style, but is there a general consensus yet? (My last car was a Miata and I remember it was generally accepted that after 50k you needed new shocks; just wondering if it was similar with MINIs)
also depends on what springs you're running with the stock shocks. With stock springs, i reckon you should get more than 50k miles, but then again, as you said, it depends on the usage....
__________________
Factory built 08/08 MINI JCW: JCW Aerokit, M7 C-Wing, Bilstein PSS10, Vorshlag camber plates, RennSport Racing Rear Upper and Lower Control Arms, Howerton Engineering HFS-3 w/ Race Tank, Whiteline 20mm RSB, RMW Tune, Dunlop Direzza Star Spec Z1, DoS CAI, Evolve FMIC, BSH OCC + Dual Boost Port, NM SSK, etalj-spec torque arm ;), Goodridge SS Brake Lines, Endless RF-650 fluid, Carbotech XP12s, ALTA PSRS, Powergrid adjustable endlinks, Challenge Decals
In keeping with compatibility and why I think they'll fit, in another post but I'm not sure where, it was said that the JCW R56 rear bar will fit the R53. Go here for info: http://minspeed.net/JCWRSB.htm
So, this bar is from an R56 JCW? I have a factory R53 JCW and was looking at the H-Sport 19mm bar, but then I came accross the above which is 18.5mm and figured that's what is on my car. I haven't measure it yet though.
So my question would be did the R53 JCW's have the bigger bar or the standard 17mm bar?
2006 CR/B MCS JCW, RMW (Newman) Cam and RMW Street Header, JCW Suspension, H&R 19mm rear anti-sway bar, IE fixed camber plates, Mason Engineering lower strut brace, Continental ExtremeContact DW Tires, Red interior, Chrome, HK, RMW Tune, 223 WHP / 200 WTQ
