FS:: Steel Tubing to Jack Up the MINI
#1
04-15-2016, 04:59 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Steel Tubing to Jack Up the MINI
Category: Exterior
Price: $80
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R50, R52, R53, R55, R56, R57, R58, R59, R60
Location (Region): SouthEast
Item Condition: Used
What I am selling is the 2 long metal tubes (52") and the 4 short tubes (1.75"). You will need to cut and weld them to have them look like the pictures below.
-Mechanical/Structural Steel Rectangular Tube 2" x 1" x 11ga (1.750") Cut Type: Chop Saw - Steel -0" +1/8"
-Mechanical/Structural Steel Rectangular Tube 3" x 1-1/2" x 11ga (52.000") Cut Type: Chop Saw - Steel -0" +1/8"
I will post pictures of the items soon (wanted to get this for sale ad up and haven't taken the pictures yet).
This is the thread where I got the idea - https://www.northamericanmotoring.co...-the-mini.html
Last edited by igzekyativ; 04-22-2016 at 04:57 PM.
#2
04-19-2016, 05:31 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#4
04-28-2016, 05:16 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#5
05-09-2016, 10:18 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#6
05-25-2016, 10:29 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#7
06-12-2016, 09:20 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
06-28-2016, 10:18 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#9
07-05-2016, 08:28 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#10
07-06-2016, 06:50 AM
3rd Gear
Join Date: Jul 2013
Location: Plainfield ILL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
#11
08-16-2016, 01:42 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
you could get them welded up... 
STILL FOR SALE!
STILL FOR SALE!
#12
09-15-2016, 09:34 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#13
09-26-2016, 06:15 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#14
10-01-2016, 06:31 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#15
10-09-2016, 11:59 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#16
10-31-2016, 01:39 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#17
11-14-2016, 10:28 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#19
12-08-2016, 12:41 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#20
12-13-2016, 02:16 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#21
12-26-2016, 05:06 PM
I was in the area when I made my last post. I was going to offer $65.
I asked if you would come down in price because you are actually asking average retail price for what you have. Metals Depot came up with $79 for the same thing. Internet quote prices are actually higher than if you go in. Metal Supermarkets has a distribution center just outside of Atlanta.
If I were to buy a 12' stick of 3x1.5x0.120, and grab an 18" 2x1x0.120, it even be cheaper. If there were drops laying around already cut to those lenths, it's $0.50/lbs for A36. Talking like $19 for the 38lbs of steel.
You are going on 9 months sitting on these things, you might want to think about dropping your price. Scrap prices are really low, like $0.02/lbs, so if you where to haul them away to scrap, you'd get $0.75 in return.
I asked if you would come down in price because you are actually asking average retail price for what you have. Metals Depot came up with $79 for the same thing. Internet quote prices are actually higher than if you go in. Metal Supermarkets has a distribution center just outside of Atlanta.
If I were to buy a 12' stick of 3x1.5x0.120, and grab an 18" 2x1x0.120, it even be cheaper. If there were drops laying around already cut to those lenths, it's $0.50/lbs for A36. Talking like $19 for the 38lbs of steel.
You are going on 9 months sitting on these things, you might want to think about dropping your price. Scrap prices are really low, like $0.02/lbs, so if you where to haul them away to scrap, you'd get $0.75 in return.
Last edited by Gustav129; 12-26-2016 at 05:16 PM.
#22
01-05-2017, 10:51 AM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#23
01-19-2017, 01:48 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#24
01-28-2017, 01:39 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
#25
02-10-2017, 03:05 PM
Join Date: Jan 2014
Location: Ashburn, VA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts