Welcome to North American Motoring, the North American MINI Community of owners and enthusiasts!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and photo galleries. By joining our free community you will have access to post topics, communicate privately with other MINI enthusiasts (PM), respond to polls, upload your own photo gallery and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact our support team.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Spring has finally sprung and it's time to get outside and work on those MINIs! Are you due for an oil change but would prefer to learn how to do it yourself instead of driving 100 miles to the nearest dealer? Is it time to rotate those tires after taking all of those twisties in Chattanooga at 60 MPH?
Have you ever wondered how you could give your MINI that fresh from the showroom shine without spending a fortune? (MINI prep fee)
We would like to invite everyone to our house on Saturday, April 21st at 1:00PM for a Maintenance and Shine Party.
Motor on over to find out the answers to the following questions:
1. Why wash your MINI with two buckets?
2. What is Zaino bling?
3. Why not just run the MINI through a car wash?
I'll be installing some ceramic brake pads on Zipper at 11:00AM if anyone would like to show up early to see how it's done. The maintenance and shine sessions will begin around 1:00 and last until..... Whenever! We have a half-round driveway that can accommodate a lot of MINIs, all of the necessary tools to perform the oil changes and tire rotations (including air tools. Muhahahhaha), numerous hoses with excellent water pressure and a spacious deck and screened in porch to relax on after we get the MINIs in tip top shape.
Samantha and I will provide drinks and snacks. I'll even fire up the grill later on in the day for a cookout.
We live 1.5 miles off of I75N in Ooltewah @ Exit 11. I'll PM the exact directions to those that RSVP. Please RSVP by 4/18 to this thread if you plan on attending and be sure to include the number of guests and MINIs.
We miss everyone and look forward to another fun meetup!
-Chris
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
Excellent! I forgot to mention that I'll be purchasing our oil filters from outmotoring.com and if anyone wants to join in on the purchase to reduce shipping costs just let me know. The oil filters are $6.95 each.
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
Great...I'll take a couple. Do you need the $$ now?? And do you know anywhere here in town I could get my oil changed before then? I really shouldn't wait that long...anybody get their oil changed at one of the quicky places??
Don't do it. Unless you expect a ton of miles, just wait and make sure the oil level is ok and come on the 21st and let me or Chris do the change.
The quality of work at the quicky places is so variable you can get major damage done by them.
I will be there for the meet, and don't really need anything done so I can do oil changes.
Quote:
Originally Posted by minivern
Great...I'll take a couple. Do you need the $$ now?? And do you know anywhere here in town I could get my oil changed before then? I really shouldn't wait that long...anybody get their oil changed at one of the quicky places??
Chris,
Thanks so much for hosting again. I will be coming and can bring the harbor freight tool if you want.
I put the ceramic Hawk pads at the start of the year and they are a great improvement.
I could go for a couple of oil filters also.
Let me know what I can bring:
- Tools
- Refreshments
I agree with Jeff about those quicky places. I had my oil pan plug stripped by one of those places on my old truck. They also put in way too much oil one time.
Jeff: Could you bring a jack and a few additional jack stands?
Quote:
Originally Posted by thulchatt
Nooooooooooooooooo!
Don't do it. Unless you expect a ton of miles, just wait and make sure the oil level is ok and come on the 21st and let me or Chris do the change.
The quality of work at the quicky places is so variable you can get major damage done by them.
I will be there for the meet, and don't really need anything done so I can do oil changes.
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
Excellent! I forgot to mention that I'll be purchasing our oil filters from outmotoring.com and if anyone wants to join in on the purchase to reduce shipping costs just let me know. The oil filters are $6.95 each.
Chis, I will take two filters if you haven't ordered them yet.
Do you want me to drop off the money to you?
I agree with Jeff about those quicky places. I had my oil pan plug stripped by one of those places on my old truck. They also put in way too much oil one time.
Jeff: Could you bring a jack and a few additional jack stands?
Will do.
I can bring a jack, 4 stands and more tools than I need.
Do you want me to bring the Harbor Freight brake tool? I really makes doing the rears much easyer.
Will do.
I can bring a jack, 4 stands and more tools than I need.
Do you want me to bring the Harbor Freight brake tool? I really makes doing the rears much easyer.
That would be great! (including the rear brake tool) Everyone can bring me the money for the filters the day of the meetup. Remember to bring 5 quarts of good synthetic oil! (I use Mobil 1)
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
This thread has been quiet for a while so I want to remind everyone to come and get whatever they need done taken care of.
I don't have any work to do on my car so I will be available to change oil, change manual trany fluid, brakes, rotate tires (don't they roll on their own LOL) and other tasks dealer charge big money for.
As Chris said, just bring the fluids, filters or what you want done.
If you have a question about what I can do, feel free to send me a PM before the meet.
I don't have any work to do on my car so I will be available to change oil, change manual trany fluid, brakes, rotate tires (don't they roll on their own LOL) and other tasks dealer charge big money for.Jeff
I don't want to miss this!! How late do you think y'all will be there? Maybe I can come over after work!
I'll tell work that I HAVE to leave early and then I hurry over to your house! Maybe there will be time to change my oil??! I bought some! And what can I bring? Yippee. I'm really looking forward to seeing everybody.
I'll tell work that I HAVE to leave early and then I hurry over to your house! Maybe there will be time to change my oil??! I bought some! And what can I bring? Yippee. I'm really looking forward to seeing everybody.
We'll have your oil changed in 15 minutes. Bring some of your famous sweets!
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
I think I can come over for a little while and say hello. My oil should be great since it was recently changed but hey, I'd like to see some of you folks.
Herbert
__________________ My Blog (quite possibly offensive)
Come on folks! The weather is supposed to be absolutely beautiful this Saturday!! Let's fill the driveway with MINIs! I would love to see a classic here as well! -nudge nudge-
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
We know who that is!!!
I'll be there as soon as I can get off work. I'm starting my campaign tomorrow so they will be sick of me by Sat. afternoon and want me to leave!! Bringing brownies...do I need to bring Nanna Puddin' too??
Thanks for the directions Chris...I'm really looking forward to seeing everybody again.
We know who that is!!!
I'll be there as soon as I can get off work. I'm starting my campaign tomorrow so they will be sick of me by Sat. afternoon and want me to leave!! Bringing brownies...do I need to bring Nanna Puddin' too??
Thanks for the directions Chris...I'm really looking forward to seeing everybody again.
Mmmmmmm. Nanna Puddin' sounds good!!
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
THANK YOU, THANK YOU, THANK YOU!! I really appreciate Chris and Jeff looking at Gary and giving me the diagnosis. His condition: serious but stable. And he's got new oil!! YIPPEE! I'll work on the other problems...hopefully before weekend after next!
Thanks also to Samantha. I had a great time - even though tools were involved!
THANK YOU, THANK YOU, THANK YOU!! I really appreciate Chris and Jeff looking at Gary and giving me the diagnosis. His condition: serious but stable. And he's got new oil!! YIPPEE! I'll work on the other problems...hopefully before weekend after next!
Thanks also to Samantha. I had a great time - even though tools were involved!
No problemo! Many thanks to Jeff for assisting with my brake job. Zipper stops on a dime now with NO SQUEAKS!
Thank you all for stopping by yesterday. I hope that we can get a bigger group together after MOTD for dinner.
BTW, the deserts are awesome. Samantha and I ate brownies and nanna puddin' for dinner last night!
__________________
2006 DS/B MCS "Zipper" 15% Helix Pulley, Helix CAI, Alta IC Diverter, Catch Can - 2008 AB/S Cooper Clubman "Draven" - 1994 Classic "Sneaky Pete"
MOTORING ID: MOTO129
Linear Mode
