R56 Exhaust Questions
#2
Try to contact a couple exhaust shops in your area, tell them what you want to do, Are you doing pretty much a build up straight pipe, if so it will take time to fab up and then mount in. Most of the cost is the labor, not materials . Pipe is pipe.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#3
Will it sound good?
#4
It will be loud and will drone if custom straight all the way back. Unless they change it up or do something to it. Your back hatch might vibrate a bit under certain revs. I would do a JCW or milltek non res and call it a day.
JCW
https://www.northamericanmotoring.co...st-to-mcs.html
https://www.northamericanmotoring.co...e-highway.html
JCW
https://www.northamericanmotoring.co...st-to-mcs.html
https://www.northamericanmotoring.co...e-highway.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#5
It will be loud and will drone if custom straight all the way back. Unless they change it up or do something to it. Your back hatch might vibrate a bit under certain revs. I would do a JCW or milltek non res and call it a day. JCW https://www.northamericanmotoring.co...st-to-mcs.html https://www.northamericanmotoring.co...e-highway.html
#6
You are welcome.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#7
Trending Topics
#9
JCW with resonator delete is loud , nice sound and pops and cracks. The milltek non res is loud also. But not as loud as a full straight pipe ( but then you have drone and vibrations in the back ) .
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#10
If you want to do stage 2 you'll need a catless/high flow cat downpipe as well as an exhaust system. I don't know if the stock JCW exhaust is up to the task. The Invidia Q300 system (which I have) is a popular choice around here. It drones a bit more than something like a Milltek but it gets the job done and is significantly cheaper than most systems out there. As for a downpipe there are plenty of used ones on the market here. You can also message a user on here with the name MarioKart. Mario sells super high quality downpipes, and is a Manic dealer if you happen to live in/near California and need a tuner. Between Mario's downpipe and the Invidia system my car is really loud, and drones quite a lot. It's all about whether you are comfortable with that. There's also the loudest option which would be a full custom straight pipe. That would drone a ton but get you the most performance and might be the cheapest option depending on the shop and how much they charge. Keep in mind your state's emissions regulations as well. if you live in a state that does sniff tests or visual inspections for emissions, you'll fail unless you swap in the stock exhaust components for the inspection. If your state does OBDII tuning the manic tune will get rid of the check engine light and you can pass. Or Mario's downpipes don't throw a light to begin with because of how he spaces the O2 sensors
#12
If you want to kill the drone with a catless downpipe and Invidia system - https://www.northamericanmotoring.co...ne-solved.html
Eric
Eric
#13
Check the classifieds, Ive seen some decent cat-back units for sale. I personally have a Borla cat-back and love it. I don't have a downpipe but according to MarioKart, a well known member and Manic tuner on this forum, the downpipe would increase sound by approximately 15-20%
#14
Check the classifieds, Ive seen some decent cat-back units for sale. I personally have a Borla cat-back and love it. I don't have a downpipe but according to MarioKart, a well known member and Manic tuner on this forum, the downpipe would increase sound by approximately 15-20%
mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Thread
Thread Starter
Forum
Replies
Last Post
haztronic
R60 :: Countryman Talk (2010-2015)
4
02-03-2016 03:50 PM