R56 Could I get a little assistance on the vacuum pump line?
#1
Could I get a little assistance on the vacuum pump line?
Doing a pressure check I removed the turbo inlet tube, and capped off the turbo.
I removed the vacuum line off the vacuum pump and used that as an intake source and compressed air into there. I have air coming out of the other end of that vacuum line.
However for the life of me I cannot figure out where the other end is supposed to connect to. It is completely open and not connected to anything at the moment. I figured I might have accidentally removed it from it's original location.
At first I thought it might have gone to the pressure converter. But those vacuum lines are where they are supposed to go.
It is hard to see down there, and any help would certainly be appreciated.
Thanks.
I removed the vacuum line off the vacuum pump and used that as an intake source and compressed air into there. I have air coming out of the other end of that vacuum line.
However for the life of me I cannot figure out where the other end is supposed to connect to. It is completely open and not connected to anything at the moment. I figured I might have accidentally removed it from it's original location.
At first I thought it might have gone to the pressure converter. But those vacuum lines are where they are supposed to go.
It is hard to see down there, and any help would certainly be appreciated.
Thanks.
#6
Great site for reference and pics. You can always use our site if you pop the p11 digit part # in and we have close up pics. Those vacuum lines.
example : 1165757046
http://www.ecstuning.com/Search/SiteSearch/11657570465/
example : 1165757046
http://www.ecstuning.com/Search/SiteSearch/11657570465/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#7
Great site for reference and pics. You can always use our site if you pop the p11 digit part # in and we have close up pics. Those vacuum lines.
example : 1165757046
http://www.ecstuning.com/Search/SiteSearch/11657570465/
example : 1165757046
http://www.ecstuning.com/Search/SiteSearch/11657570465/
Tell Kirill over at ECS that the guys at RallySport Direct miss him
Trending Topics
#8
Yep , thats the one, they can crack and sometime separate at the connections.
Cool I will let him know.
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
Mini Mania
Drivetrain Products
0
09-02-2015 09:05 AM