R56 Getting speedo back in place after removal
#1
Getting speedo back in place after removal
So I took apart my dash to add bluetooth, and I can't get the damned speedo trim to reseat correctly. How the HELL do I get it to go back in place!???! Looked at all of the vids/diys i could find. Everybody is all over taking the dash apart, then finish it with "Ok, now just put everything back on." Wut?
I tipped the rear of the trim in first, then tried to seat it. Gets almost there, but not quite.
I tipped the rear of the trim in first, then tried to seat it. Gets almost there, but not quite.
Last edited by scf; 03-27-2015 at 10:27 AM.
#3
I've had my dash apart a few times and have not had trouble putting things back together. You're going to have to take it apart and try again. You don't have something lined up correctly. May be the wire to the hazard button is in the way?
Sorry I haven't been much help but there is no trick to speak of.
Sorry I haven't been much help but there is no trick to speak of.
Thread
Thread Starter
Forum
Replies
Last Post
09R56
R56 :: Hatch Talk (2007+)
17
11-16-2022 10:49 AM
F55/F56 Rear seat back removal anyone?
flyers47
F55/F56 :: Hatch Talk (2014+)
17
07-27-2020 02:38 PM
Navigation & Audio My 07 COOPER S has an mp3 jack STOCK!
surfblue
Navigation & Audio
4
10-24-2018 01:20 AM