I stole this idea from another thread: the boot S is the same size as the intercooler cover S. I Dremeled the back down to reduce the thickness and JB Welded onto the cover.

I would take a picture, but my camera is messed up, and the engine is dirty.

 

Yah that is a JCW logo on my blackberry... Its just a little sticker that came with the CF JCW shift ****. Yes I am aware that I do have a problem.....

 

Yah, dood. You're losin' it. Just don't go and get a JCW tattoo or something! GAH!
CHeers,
Skottoman

 

Still hanging in there!


Dorky because I got the box end wrench at the tool exchange shop, and welded it to the "tuner" lug socket.

My dorky Samsonite MINI Track Kit. Old suitcases work great for this. Note the dorky shoes.

 

The good ole' Converse All-Stars

 

Ref:


How big are the perforations in the sunroof vinyl?? If companies like Cooper Flags and Aesthetic Creations had this stuff in stock, they could just cut them into the appropriate sizes

 

Sounds too easy.

 

Good taste in music! Nice to see that real punk's not dead!

 

Cool hehehe nice idea.. I was gonna use the letters off the cooper to spell out oreo but i dont have a black car with white interior. So it wouldnt look right. But it would look cool if someone who actually has these colors do it.

 

Too much time on my hands:
https://www.northamericanmotoring.co...0&ppuser=32440

So far, $1.39 for the PVC elbow to mount the filter at the right angle. This, so far, is the mockup for fitment and design. The final will be welded and coated on the inside with black heavy duty spray on truck bed liner. HAI to CAI on the cheap!
Apologies for some bad photos; it's cooold out there and the hands they are ashakin'.
-skip-

 

I did this with pins collected during our first trip to The Dragon in 2007. I also have a pin of a red little Chilli's resturant chilli pepper dancing pepper, that I tipped our waitress pretty good for.

The hubby didn't like the idea of putting holes through the headliner with these. I did the same thing years ago in another car with all the concert group pins and such. I had about 20 or 30 back then tacked up all over. When I sold the car the pins came down of course. A little rub with a clean finger and the holes disappeared. Besides, it's my car. I'm not worried about pleasing any down the road owners at this time.

Oh.... Also my new black Ipod my wife got me for Valentines day to replace my white one. (black looks soooo much better in a MINI)

 

This post was SUCH a long time ago, but I just traded in my Grand Am for my first MINI. HAHA. LOVE IT! Again...long time ago, but new for me

 

Those of you asking about removing "cooper" off the back, those posts are really old so you have probably already done it... but it comes off much cleaner if you use a hair dryer and blow hot air on it for about two minutes before going at it with floss. Done this to 3 of my friends' cars, glue came off completely each time.

 

We old timers are always glad to have new eyes around!
Welcome to NAM.

 

how is the ipod attached to the dash????
im working on converting the cup holder into an ipod holder... since no drinks are allowed in Minnie anyway

 

Haha! I ALSO traded a Grand Am for my MINI!

 

Awesome. Such a step up from that car, though it did get me through 5 years of college and grad school with 28 mpg to boot. The MINI has decent shoes to fill, but so far has exceed all my expectations :-D

 

New wings...maybe not 5 bucks for these, but it's possible to get plastic emblems...

 

tgl333: NICE!!

 

i just discover this...

 

TGL333 - where did you get those? I'm retired USAF and it would be neat to put on my clubby someplace...

 

I got it from this website:

http://chromeemblems.com/detail.aspx?ID=352

Then took it to a hardware store to have them cut off the "U.S. Air Force" line on the bottom. (it won't fit well with the type on there).

Once I get my wings I'll try to find some good looking, large, pilot wings to put on instead.

[there is a catch. I photoshopped the upclose photo. There was a hole the size of a dime underneath the "mini" wings and two small holes for pegs to go in. The small holes are covered, but part of the big hole remains visible above the star. I'm going to find SOMETHING (probably duct tape) and paint it silver so it's not nearly as visible. Right now I have some gray tape on it and it stands out a bit if you're standing right about the car]

 

i saw one with the cooper changed to pooper...

 

I have standard side scuttles with white turn signals- I felt they were missing something, but I didn't want to spend the $100+ for fancy ones from MINI, so I got a $7 roll of pin stripping from Pep Boys that was one wide piece of tape with multiple width stripes-one of the widths was a perfect fit and trimmed it to follow the inner groove.

I have enough left over to do it about 10x's if it ever gets wrecked- but 4+ months and it still looks good.

My son thinks it looks dorky, but I like it.

 

There's an eBay seller who sells the caps for $10 shipped. You get four, two for each door. He calls them "spiffy caps."

http://tinyurl.com/6j7uo4

I thought they only came in black, but he may have silver too.

In any event, I took a Sharpie silver colored laundry marker and "painted" the caps silver. Took about two minutes while watching TV.

Was somewhat stunned to see that the Sharpie silver color was an EXACT match of my MINI's silver panels. I suspect you could use your touch up paint to make the caps any color you want.

For me, buying on eBay was easier. Since we don't have big box stores in San Francisco going to Lowes would entail lots of fuel, about two hours round trip and other hassles. Certainly not worth it to save $5.

See my gallery for pics of the caps in action.