R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 Transmission issue

Thread Tools
 
Search this Thread
 
  #1  
Old 06-11-2016, 10:38 AM
Germain Jean Pierre's Avatar
Germain Jean Pierre
Germain Jean Pierre is offline
Neutral
Thread Starter
Join Date: Jun 2016
Location: Island of curacao
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Transmission issue

Hi guys i'm new to this forum ,
i just got a JDM mini cooper s 2005
after a few minutes of drive the tranny start acting crazy what can that be ?
please i need your help




 
  #2  
Old 06-11-2016, 11:14 AM
-=gRaY rAvEn=-'s Avatar
-=gRaY rAvEn=-
-=gRaY rAvEn=- is offline
Moderator
iTrader: (43)
Join Date: Aug 2008
Location: Cape of Cod
Posts: 5,809
Received 64 Likes on 54 Posts
Sorry but difficult to say for certainty with only that info, but if it's an automatic, the 1st gen "S" model automatic transmissions are typically a solid unit....no chronic issues to speak of since its not like the non-S CVT transmission.

Trans fluid flush and re-adaptions, a faulty transmission cable harness(s) there are two, or bad valve body ?

Were me, I would try a flush with JWS3309 transmission fluid and see if that does anything first....(MINI had no planned maintenance for this so many folks over look it )
 
  #3  
Old 06-11-2016, 11:22 AM
sevin's Avatar
sevin
sevin is offline
6th Gear
Join Date: Jul 2014
Location: North Carolina
Posts: 1,118
Received 24 Likes on 22 Posts
How do you expect us to help you when all you say is "the tranny started acting crazy"? You don't even tell us if it's a manual or not haha

The car is not JDM. That stands for "Japanese Domestic Market".
 
  #4  
Old 06-11-2016, 11:49 AM
-=gRaY rAvEn=-'s Avatar
-=gRaY rAvEn=-
-=gRaY rAvEn=- is offline
Moderator
iTrader: (43)
Join Date: Aug 2008
Location: Cape of Cod
Posts: 5,809
Received 64 Likes on 54 Posts
OP is from northern tip of South America....something "lost in translation" I guess. I had to laugh at that too, kept looking at photo, wondering...am I missing something here...lol.
 
  #5  
Old 06-11-2016, 02:38 PM
ZippyNH's Avatar
ZippyNH
ZippyNH is offline
6th Gear
iTrader: (1)
Join Date: Sep 2009
Location: Southern NH
Posts: 12,605
Likes: 0
Received 32 Likes on 32 Posts
Originally Posted by -=gRay rAvEn=-
OP is from northern tip of South America....something "lost in translation" I guess. I had to laugh at that too, kept looking at photo, wondering...am I missing something here...lol.
Guess was his/her way of saying RHD...imported from Japan?
Your only real chance is to flush the tranny....
Some folks have to change the valve body to fix shifting issues...hate to say...bet the last owner dumped it...and you got stuck . Buy it cheap or have a warrenty or ability to return it?
 
  #6  
Old 06-11-2016, 10:33 PM
Germain Jean Pierre's Avatar
Germain Jean Pierre
Germain Jean Pierre is offline
Neutral
Thread Starter
Join Date: Jun 2016
Location: Island of curacao
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
zippy you got it right !
tommorow i will drain the oil en try some fresh thanx for the tips guys !
 
  #7  
Old 06-13-2016, 01:25 PM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
The fluid drain and refill is unlikely to do anything. The valve body is much more likely.
Hard shifts or slipping?
 
  #8  
Old 06-13-2016, 01:31 PM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
Originally Posted by -=gRay rAvEn=-
the 1st gen "S" model automatic transmissions are typically a solid unit....no chronic issues to speak of since its not like the non-S CVT transmission.)
Actually the automatic is not holding up well at all. Many people need valve bodies replaced as early at 30k miles. It is not as bad as the CVT and it doesn't cost as much to fix.
 
  #9  
Old 06-14-2016, 02:04 AM
-=gRaY rAvEn=-'s Avatar
-=gRaY rAvEn=-
-=gRaY rAvEn=- is offline
Moderator
iTrader: (43)
Join Date: Aug 2008
Location: Cape of Cod
Posts: 5,809
Received 64 Likes on 54 Posts
Originally Posted by Aspen
Actually the automatic is not holding up well at all. Many people need valve bodies replaced as early at 30k miles..
Curious as to what you base this on ?
 
  #10  
Old 06-14-2016, 05:09 AM
ZippyNH's Avatar
ZippyNH
ZippyNH is offline
6th Gear
iTrader: (1)
Join Date: Sep 2009
Location: Southern NH
Posts: 12,605
Likes: 0
Received 32 Likes on 32 Posts
Originally Posted by Aspen
Actually the automatic is not holding up well at all. Many people need valve bodies replaced as early at 30k miles. It is not as bad as the CVT and it doesn't cost as much to fix.
So...at under 30,000 miles they were under warrenty right?! ...I bet 90% of automatic cars are approaching 100,000 miles give or take 20,000....the oldest automatic S cars are 10+ years old....
My suggestion would be many folks that need transmission work find these forums...but threads are much much much less common than the CVT or even clutch issues.....and let's face it...many folks that are here RACE their cars...and are VERY hard on them...
So the people with issues are well represented here...as are most issues, and big $$$ much more... especially ones that occur longer term, leaving the car very usable for a long period .
Any 10 year old auto transmission on a higher performance car is something to watch... something to be weary of, but no more than needing a clutch imo.
And one tip...
The folks that spend all day at dealers tend to know what fails....cause the parts that get delivered to independent MINI shops in my REGION goes through a few select dealers...
hint....
If one tells you doesn't happen as rarely as ocd folks on the internet perceive it to be happening....I'd say yup...based on nothing more than the person's integrity, never mind it makes sense when you pause to think it through.
 
  #11  
Old 06-14-2016, 05:57 AM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
It's not just this board, but there is an 80 page thread on failed autos here and a new thread is started at least every week. This transmission is shared with a VW and VW went as far as to extend the warranty because so many of them were failing. There have been several articles printed about the failure of this tranny in transmission trade journals. Also at least 3 valve body rebuilders are making replacements and keeping them in stock. WMW has done lots of conversions of failed autos.


This auto is problematic. I don't know the failure rate, but is certainly higher than a normal car. I would not recommend buying one that is for sure.
Also there aren't very many R53 autos out there. Most people either got a stick or went with the R50 CVT.
I agree that internet boards are full of people who only come to complain, on the other hand there are even more people who buy automatics that have never been to an internet car forum in their lives, especially women, and a MINI automatic is a chick car. (mine was bought for my wife, but she got tired of it, so I rock it on sunny days)


I strongly doubt there are many people racing a MINI automatic. If you ever drove one of these things you would know why. It adds 150lbs, cut the 0-60 by a second, won't hold gears and delays shifts by close to a second. It's OK to toodle around in and works for a non-stick driver, but anyone interested in track work would look to the stick. In autox on a tight course it is a hot mess.
 

Last edited by Aspen; 06-14-2016 at 09:05 AM.
  #12  
Old 06-15-2016, 05:14 PM
-=gRaY rAvEn=-'s Avatar
-=gRaY rAvEn=-
-=gRaY rAvEn=- is offline
Moderator
iTrader: (43)
Join Date: Aug 2008
Location: Cape of Cod
Posts: 5,809
Received 64 Likes on 54 Posts
One way I can determine the actual demand for a MINI part is for me to perform a National Check on the part number: 24347551103.

Of the 110 MINI dealers in the USA.......Only eight stock one on their shelves. This exactly what I said before. There is not a wide spread problem with the 1st Gen S model Automatic.

What Way does specialize in is the R50 CVT swap to manual and the R50 5spd swap to 6spd.....

And BTW, this transmission is presently shared with the 2010-Present Countryman S and last I knew, the Toyota Camry.....

Personally in 6 years, only thing ever to go over my counter related to this transmission is the JWS3309 fluid for a flush.
 
  #13  
Old 06-16-2016, 08:20 AM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
Well, I will just have to continue to disagree. Mini wants upwards of $8,000 to put in a new automatic and doesn't even do valve body replacements. I am not surprised that people don't spend $8k on a $6k car.
I did a quick search yesterday and found more than 10 valve body specialists that rebuild and replace this tranny. Then I found multiple references in trade mags on how to diagnose and repair it. You can even buy a detailed how to repair manual.
Later models hopefully were fixed with improved solenoids and valve bodies.
Even MINI does continuous improvements to attempt to improve their quality numbers.
 
  #14  
Old 06-16-2016, 12:05 PM
ZippyNH's Avatar
ZippyNH
ZippyNH is offline
6th Gear
iTrader: (1)
Join Date: Sep 2009
Location: Southern NH
Posts: 12,605
Likes: 0
Received 32 Likes on 32 Posts
Originally Posted by Aspen
Well, I will just have to continue to disagree. Mini wants upwards of $8,000 to put in a new automatic and doesn't even do valve body replacements. I am not surprised that people don't spend $8k on a $6k car.
I did a quick search yesterday and found more than 10 valve body specialists that rebuild and replace this tranny. Then I found multiple references in trade mags on how to diagnose and repair it. You can even buy a detailed how to repair manual.
Later models hopefully were fixed with improved solenoids and valve bodies.
Even MINI does continuous improvements to attempt to improve their quality numbers.
Difference between a good dealer and a bad...
A good ones know the issues...and can reccomended a $$ fix and has the know-how ....
A bad dealer...they just say the box is bad...need a new one...or..."we can trade-in your car for ya...you are halfway there!!".
Some dealer are just parts changers....the good ones sub out some of the jobs that are beyond the typical skill level of a dealer tech...but a valve body swap is a junior item in a tranny shop.
Yes...VW did do a recall...but as you said ..most failed EARLY...UNDER WARRANTY ...
Would I trust a higher performance car with an auto tranny....NO.... ESPECIALLY ONE THAT MIGHT HAVE NEVER had the fluid changed.
But the tranny itself is used with slight variations in many cars...
There is a complete rebuild thread over on motoring alliance...same rebuild kit as most other similar trannys...
Would I try it?! Heck no...but it was a high mile unit driven hard for many years...with fluid changes.
 
  #15  
Old 06-24-2016, 04:25 AM
Germain Jean Pierre's Avatar
Germain Jean Pierre
Germain Jean Pierre is offline
Neutral
Thread Starter
Join Date: Jun 2016
Location: Island of curacao
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts


just drained the tranny and look what i got !<br/>filling up is a pain in the @@@@<br/>wil need a oil pomp and nozzle to pump it in
 
  #16  
Old 06-24-2016, 05:54 AM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
It looks normal to me. Tranny fluid gets dark very quickly, but can still be fine. Are there any bits of metal or glitter in the drain pan or on the drain plug?
 
  #17  
Old 06-25-2016, 05:43 AM
KevinR's Avatar
KevinR
KevinR is offline
5th Gear
iTrader: (4)
Join Date: Dec 2003
Location: Macon, GA
Posts: 655
Received 8 Likes on 7 Posts
Originally Posted by Aspen
I did a quick search yesterday and found more than 10 valve body specialists that rebuild and replace this tranny. Then I found multiple references in trade mags on how to diagnose and repair it. You can even buy a detailed how to repair manual.
Would you mind listing some of those specialists? My wife's Volvo C70 has a similar transmission and we are starting to see some issues with it. (Works fine when cold, has a hard 2-1 downshift when hot. Back to fine as trans cools down.)
 
  #18  
Old 06-25-2016, 10:40 AM
Germain Jean Pierre's Avatar
Germain Jean Pierre
Germain Jean Pierre is offline
Neutral
Thread Starter
Join Date: Jun 2016
Location: Island of curacao
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
after a second flush 2.75 quarts of oil that was what came out with the car warmed up
the car driver 80% good wayyy better than what is was so i think maybe 1 last flush it should be gr8 , one thing i notice my model does not have the overflow tube is this something usual ?
 
  #19  
Old 06-25-2016, 10:58 AM
RB-MINI's Avatar
RB-MINI
RB-MINI is offline
6th Gear
iTrader: (1)
Join Date: Oct 2009
Posts: 2,398
Received 489 Likes on 408 Posts
It should have the overflow tube. That's how you measure the correct level for the trans fluid.
 
  #20  
Old 06-26-2016, 03:24 PM
Aspen's Avatar
Aspen
Aspen is offline
4th Gear
Join Date: Apr 2012
Location: Kanuckistan
Posts: 423
Received 26 Likes on 24 Posts
You need the overflow tube, you can order one.


KevinR - many people have used RevMax with good success. http://www.revmaxconverters.com/valv...lacements.html
 
  #21  
Old 06-26-2016, 05:21 PM
KevinR's Avatar
KevinR
KevinR is offline
5th Gear
iTrader: (4)
Join Date: Dec 2003
Location: Macon, GA
Posts: 655
Received 8 Likes on 7 Posts
@Aspen: thanks!
 
  #22  
Old 06-29-2016, 01:01 PM
ECSTuning's Avatar
ECSTuning
ECSTuning is online now
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth, Ohio
Posts: 34,808
Received 1,966 Likes on 1,766 Posts
Its right here: Part # 24117551083

https://www.ecstuning.com/Search/SiteSearch/24117551083/






Here is the diy for the tans fluid to help: https://www.northamericanmotoring.co...id-change.html

https://www.northamericanmotoring.co...n-fluid-3.html



How many MINI are down there in Curacao, been down to Aruba and did not see any. Any in Bonaire ? Saw a bunch in Barbados RHD which was cool .
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moremini
MINI Parts for Sale
1
04-20-2016 07:08 AM
Mini Mania
Drivetrain Products
0
03-24-2016 11:31 AM
Sandijs Shifers
R50/R53 :: Hatch Talk (2002-2006)
6
03-23-2016 02:13 PM
steebo777
MINIs & Minis for Sale
1
03-21-2016 06:33 AM
JWA
MINI Parts for Sale
2
03-20-2016 04:29 PM



Quick Reply: R50/53 Transmission issue



All times are GMT -7. The time now is 01:01 PM.