R50/53 Meet Dr. Watson (Build Thread)
#126
Car is back together. Bled the brakes and the clutch slave cylinder and my brakes and clutch feel mighty fine. I just need to source another quart of fluid and I'll be able to test out the clutch to make sure everything's good. Car should be back on the road this week.
Got busy today adjusting the ride height and changing the look...again.
A not so teaser, teaser.
Got busy today adjusting the ride height and changing the look...again.
A not so teaser, teaser.
#129
Somewhat. I've had "built" cars in the past that were corner weighted professionally but this one is more or less just eyeing it. I'm not too worried about it as I'm more or less lowered for looks. The MINI gets no track duty.
Last edited by Evasive; 05-14-2012 at 05:57 AM.
#133
Searched for boost leaks over the weekend and found a couple. Big thanks to Miniconcarne for hooking me up with silicone hoses for my IC end tanks and a bypass valve...for free. With personal delivery to boot!
Below is my home depot special tool I made.
"...pssssss...." is the sound of slow A big no no. Glad that I got my 4 extra psi back
Below is my home depot special tool I made.
"...pssssss...." is the sound of slow A big no no. Glad that I got my 4 extra psi back
Last edited by Evasive; 05-22-2012 at 12:49 PM.
#135
Resurrecting an old thread here... But as probably many will agree, this Mini is one of the best on NAM. Very good balance of the classic Mini look with modern updates. Simply amazing.
I am also getting Megan coilovers soon (the EZ streets versions without camber plates, not the Euro street versions that it looks like you have). I realize the front splitter also adds to this look, but I want to go for that exact ride height. On the EZ streets the adjustments might not be the same, but how did you measure the drop? Is it even front and rear? What is the height to the top of the archs now? I also have 17 inch wheels.Thanks!
I am also getting Megan coilovers soon (the EZ streets versions without camber plates, not the Euro street versions that it looks like you have). I realize the front splitter also adds to this look, but I want to go for that exact ride height. On the EZ streets the adjustments might not be the same, but how did you measure the drop? Is it even front and rear? What is the height to the top of the archs now? I also have 17 inch wheels.Thanks!
#138
#139
Thread
Thread Starter
Forum
Replies
Last Post
Witsticka
R50/R53 :: Hatch Talk (2002-2006)
16
06-23-2021 07:34 AM