Half Moon Auto :: Ohio-based service and performance

[cooper99]

How much does it cost for a dyno run there and about how long would it take?

[polizei]

Setup is $35, then $10/pull. Dyno Days are $50 for setup and three pulls, and we just had one on saturday, you missed it!

The whole process I would say takes anywhere from about 40min to several hours. It just depends if you have a stubburn MR2 or GTI infront of you.... Seriously though, if you have no problems getting your car hooked up (which you shouldn't) then the whole thing will take less than an hour.

-Cody

[Half Moon Auto]

Originally Posted by cooper99

How much does it cost for a dyno run there and about how long would it take?

Normal pricing through out the week and weekend is $35 setup $10 per pull.
once every other month there is a "dyno day" which is $50 for three pulls (setup) included.

You can come down any time during the week 1-7 pm or weekends 12-5
we're starting to get some MINI parts out on the shelf. Looks kind of bare but, its getting there!

should take about 30-40 mins.

[polizei]

Hey Justin, hopefully I'll be able to dyno and start racing in the spring. I have a christmas present coming that will make my MINI louder and put down a couple more horses. If you can get it for me for the same price as another MINI store, I'll glady buy it from you.

-Cody I need more stickers!

[draggonmann]

Cody, do I smell EXHAUST !!!!

[Half Moon Auto]

I smell exhaust................

what kind are you looking for??? of course I'll price match! what kinda question is that?

Justin

[polizei]

Actually a Megan Racing header!

http://outmotoring.com/megan_racing_...er_header.html




If everything goes well I'll get it...lol. But yea Justin, Outmotoring has it for $200.

I still have to talk to my parent's more...but a full cat-back is sure to come later.

-Cody

[draggonmann]

Now your talkin Cody.

[polizei]

Hehe...I still need to figure out prices to see if I will be able to get it or not. I want to run without a cat, but aparently the Megan's test pipe has fiberglass in it that melts and causes a bad rattle within a couple of weeks. If that happends, I might have to buy a new test pipe or cat of somesort, and I'm not sure if I'll be able to get it. Plus I also need a 2.5" to 2.25" reduction pipe made, and an 02 simulator.

So...we will see! Wish me luck.

Any upcoming parts Ralph? Maybe a header for you to? Crank pulley? Or are you going to go big with the Twincharge?
-Cody

[MGCMAN]

Cody,
Run it with a cat. Reason being emissions.
While our area isn't testing emissions now, many other places around the country do.

No cat is for off road, leaded fuel, racing applications only. Not worth it on a street car.

Justin,

Videos look great.

[polizei]

But I'm not worried about emissions. I've never been tested, and I'll bet money that I wont be tested anytime soon either. And I might put a cat on, I don't know though, it all depends on money. Even if I get it for christmas, I won't put it on until spring time due to the weather, so I would have some time to save a little for a high flow cat.

We will see!
-Cody

[draggonmann]

2% crank pulley is next on the list.

[Half Moon Auto]

Originally Posted by MGCMAN

Cody,
Run it with a cat. Reason being emissions.
While our area isn't testing emissions now, many other places around the country do.

No cat is for off road, leaded fuel, racing applications only. Not worth it on a street car.

Justin,

Videos look great.

Cody,

Call me when its time!

Hey Gerorge,

Thanks! Hopefully we'll have some street video's on there soon. I also want to mount a camera in Ralphs car for auto crossing next year...

Justin

[polizei]

Possibly some Edgewater to Justin?

I'm planning on going down when it opens back up in the spring, along with autocross' with Ralph after I turn 18. By then hopefully I'll have my MINI payed off and I'll be ready to rock. Maybe I'll be able to catch up to Ralph, but if he keeps doing stuff that's it's going to seem impossible unless I twincharge.

-Cody

[draggonmann]

I will be one step ahead all the time.

[polizei]

Yea....lol. You have more money!

We will see how long that lasts Ralph. I just might not tell you and come in there and pull a 400+hp dyno run lol! That would be great.
-Cody

[Half Moon Auto]

hey,

If you two are going you two are going to have horsepower wars keep me in mind! $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

[spillman]

Originally Posted by MGCMAN

Cody,
Run it with a cat. Reason being emissions.
While our area isn't testing emissions now, many other places around the country do.

No cat is for off road, leaded fuel, racing applications only. Not worth it on a street car.

Justin,

Videos look great.

I disagree. I believe there are gains to be had without a cat. And why would you spend money on a full exhaust or just a header and then stop the flow with a cat?

[RED FURY]

Do you carry any headers at Half Moon ? I may need one ... Mine burnt out and plugged up !!!!

Phil

[Half Moon Auto]

Originally Posted by RED FURY

Do you carry any headers at Half Moon ? I may need one ... Mine burnt out and plugged up !!!!

Phil

Nice! I sent you a PM....

We've been doing quite a bit of updating to the website! We Now now carry lamin-x film for head lights, marker lights, tail lights etc. etc.
let me know on the header...

Justin

[polizei]

Justin the updated site keeps getting better! What a fantastic change from the first release.

-Cody

[Half Moon Auto]

It's constantly evolving. Who knows what it will look like a year from now!

Any feedback is welcome. We want to carry products that keep people looking good and going fast!

Justin
HMA