You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Way Motor Works DDM joint mod party Greenville 11/11-12
Due to Waylen being currently in England Racing in the JCW MINI Challenge series, he asked me to post about the upcoming Way Motor Works and DDM joint mod party in Greenville, SC. Waylen and Dave from DDM will be available for all of your install needs. They will have special pricing on everything from pulleys to intakes and anything else you could want (see below for some pricing). Feel free to RSVP here or give Waylen a call at 317.201.8670 (he'll be back in the states on the 25th). The party will be held at the DDM shop in Greenville, directions will be posted shortly. Feel free to stop by too and see the guys in action.
Pulley Installed......................................... .............$385 including new belt and cold plugs
Rear Sway Bar Install........................................... ..$100 ($25 extra for Convertables)
Alta 22mm Rear Sway Bar.......................................$159
H-Sport Comp Rear Sway Bar...................................$220
M7 Strut Reinforcement Plates*................................$99/set Black
M7 Strut Reinforcement Plates*................................$130/set Anodized Red or Blue
M7 Strut Tower Brace* (includes SRPs)......................$199
Alta Intake w/hose* (Black, red or blue)....................$265
Alta Boxtop*........................................... ..............$call for special price
DDM Intake*........................................... ..............$230
Whatever else you want..........................................$cal l for pricing
it's on my calendar to represent at least one day with the
"62" car..... I will do my best to be there.
Bob
__________________ my grandson Cian, the Mini and me
Mini was sold to a good home in CA. I now have a 2001 M roadster silver/black .... DDM intk, M7 TB, M7 DFIC 2, RMW head/shrick , WMS pm runners/intk mfld/cmber plates, CMP custom header/ Milltek, PSS9s, BBS/T1R, AP bbk, Alta SS, plo coil/ngy, M7 str/ustr/CC , F/R sway bar, Aero Kit, op/bst gauges, JCW 380s, Quaiffe/ Clutchmaster/FW, RMW custom tune 231.7 whp, F&R sway bars and more
Well now that I'am back from the UK I thought I would chime in. I'll be happy to bring anything you guys want. I'll also be sharing all my stories from the UK race and maybe some of the pics. We should also have one of the M62 cars avail for rides. Hope to see you there.
I might make an apperance just to meet a few of you. Just to make sure the turbo's are represented.
c'mon down.... it would be great to meet you.....
__________________ my grandson Cian, the Mini and me
Mini was sold to a good home in CA. I now have a 2001 M roadster silver/black .... DDM intk, M7 TB, M7 DFIC 2, RMW head/shrick , WMS pm runners/intk mfld/cmber plates, CMP custom header/ Milltek, PSS9s, BBS/T1R, AP bbk, Alta SS, plo coil/ngy, M7 str/ustr/CC , F/R sway bar, Aero Kit, op/bst gauges, JCW 380s, Quaiffe/ Clutchmaster/FW, RMW custom tune 231.7 whp, F&R sway bars and more
Yeah man I want to see that clean install on the M62. I'll admit mine is a lil ragged and still in the development stages.
you'll get no criticism from us.... believe me we understand the process of development..... you are to admired for your work..... you wil be among friends.....
__________________ my grandson Cian, the Mini and me
Mini was sold to a good home in CA. I now have a 2001 M roadster silver/black .... DDM intk, M7 TB, M7 DFIC 2, RMW head/shrick , WMS pm runners/intk mfld/cmber plates, CMP custom header/ Milltek, PSS9s, BBS/T1R, AP bbk, Alta SS, plo coil/ngy, M7 str/ustr/CC , F/R sway bar, Aero Kit, op/bst gauges, JCW 380s, Quaiffe/ Clutchmaster/FW, RMW custom tune 231.7 whp, F&R sway bars and more
you'll get no criticism from us.... believe me we understand the process of development..... you are to admired for your work..... you wil be among friends.....
Sounds good. The car should be making 400 by then. Still on pump gas right now.
you'll get no criticism from us.... believe me we understand the process of development..... you are to admired for your work..... you wil be among friends.....
I'll be ther Sat at about 12:00
__________________ my grandson Cian, the Mini and me
Mini was sold to a good home in CA. I now have a 2001 M roadster silver/black .... DDM intk, M7 TB, M7 DFIC 2, RMW head/shrick , WMS pm runners/intk mfld/cmber plates, CMP custom header/ Milltek, PSS9s, BBS/T1R, AP bbk, Alta SS, plo coil/ngy, M7 str/ustr/CC , F/R sway bar, Aero Kit, op/bst gauges, JCW 380s, Quaiffe/ Clutchmaster/FW, RMW custom tune 231.7 whp, F&R sway bars and more
Hello Everyone, just wanted to put some directions for everyone that is coming.
* From Spartanburg/Charlotte/I85, take I-85 to exit 46B. Continue on Pleasantburg Drive Hwy 25 towards Greenwood/Mooresville.
* After 5 miles, take a left, at the traffic light, on Antioch Church Rd. A Sphinx station and a CVS pharmacy will be on your left at this intersection.
* Go 3/4 mi. and turn right on South Harris Rd. There's an Atlas Cold Storage just before the turn.
* About 1/2 mi. down Harris Rd. is DDM Works on your left, a large brown building with a number of Miatas and MINI's parked out front. You can't miss it.
* From Atlanta/Anderson/I-85, take I-85 take exit 46A. After you get off the exit, turn right on Augusta Rd. Continue on Augusta Road to the 3rd traffic light and turn right on Highway 25/Pleasantburg Drive.
* After 5 miles, take a left, at the traffic light, on Antioch Church Rd. A Sphinx station and a CVS pharmacy will be on your left at this intersection.
* Go 3/4 mi. and turn right on South Harris Rd. There's an Atlas Cold Storage just before the turn.
* About 1/2 mi. down Harris Rd. is DDM Works on your left, a large brown building with a number of Miatas and MINI's parked out front. You can't miss it.The address for DDMWorks is:
I will try to make it also, just to meet some of you. If there is anything you would like me to bring, please just ask. I look forward to seeing the "62's"
--Dan
Okay, Zaino's off so I'm thinking of heading down. I'll be on FRS channel 7, no sub channel.
(The Tar Heel guys are trying to get me 2.5 hrs the other direction to a lunch meet in Apex, so you're winning by an hour round trip. ;-) )
Dave, (the Miata guy?), I think I eavesdropped on your conversations at the annual meeting at D&Bs and you had some cool things in the works. Although I don't know jack about performance, ;-) you guys sure do and it'll be fun to hear how you're progressing.
__________________
'06 MCS CR/B "MINICHI" for sale, pls see ad
Thanks for the offer, PM sent--have to run some errands, then heading South!
Thanks guys! Had a great time. Can't wait to hear how Tom likes his mods.
Waylen put an H-sport comp rear sway bar on my car--did some donuts, hit some twisties on the way home and what a difference, even on my stocker, with run flats!
For those of you who know to ask, (I didn't until today), it's on the middle setting.
P.S. The reason I can get away with it, when the wifey said, "No mod's till it's yours."? She won't notice a 5 lb 25mm black sway bar tucked between the rear shocks, of course!
__________________
'06 MCS CR/B "MINICHI" for sale, pls see ad
Last edited by MidnightDave; 11-12-2006 at 07:26 PM.
Reason: Update and pics / 'e'
That black car in the first picture looks familiar. It's good to see Waylen finally back at work instead of screwing off in Europe. I see he drove that counterfeit GP of his too.
__________________
motoring|underground - Bringing style back to the MINI world
Many thanks to Dave (DDMWorks, our host) and Way, as well as the other MINI owners who showed up yesterday. It was great to see MINI mods and discuss them with people who really understand what makes MINIs work, and work fast.
I was impressed by the MINI work DDMWorks is doing (as well as its Miata work) and thought Way did a great job on the cars he was modding. I'd not hesitate to recommend them to others. I'd also recommend attending this type of event to anyone who is interested in modifications, or just wants to know what makes his or her MINI tick.
my grandson Cian, the Mini and me
