March Photo Contest Winner :: 89AKurt
#1
#7
Trending Topics
#12
*SPEECH!*
Thanks to all who voted for my entry! Yay Hoo!!!!!!!!
My secrets got lost somewhere amongst the infernal reaches of my computer!
I believe in the KISS (Keep It Simple Stupid) principal. I borrowed an oil pastel (black of course) to use my years of drafting experience to lay down the skid marks. I cut scrap cardboard to get the front wheels to stay turned, and to jack up the inside rear tire. The antennea happened to be bent the correct way. I had some experience with an autocross diorama:
The cone is an extra from that project, I fabbed a master, and resin cast copies.
Getting the best angle to avoid seeing the lack of a driver was a challenge.
The irony is:
>I was thinking of getting a Nikon badass camera like both Daves, but reality bit, and this Canon PowerShot kicks *** (butt will never kiss one )!
>Swifty was dirty... quite dirty because of the cinder dust on our roads.
>it's at sunset, but not a feature.
>poor Dave B., I'm sorry I kicked your butt so well. I'm going to enjoy it as long as possible.
>poor speednut, he advised me about getting a kickass camera, was really helpful, and he spent so much time Photochomping his entry.
>As an award winning model car builder, this alledged kit was too easy to build, and is the only diecast I have ever built. Yes, I modded it with Bare metal foil on the door handles and exhaust tip, straight pin gear ****, paint detailed interior, and ground off the screw thingys off the bottom. And it wins this!
Thanks again to all who voted. Those who did for me, checks are in the mail.
My secrets got lost somewhere amongst the infernal reaches of my computer!
I believe in the KISS (Keep It Simple Stupid) principal. I borrowed an oil pastel (black of course) to use my years of drafting experience to lay down the skid marks. I cut scrap cardboard to get the front wheels to stay turned, and to jack up the inside rear tire. The antennea happened to be bent the correct way. I had some experience with an autocross diorama:
The cone is an extra from that project, I fabbed a master, and resin cast copies.
Getting the best angle to avoid seeing the lack of a driver was a challenge.
The irony is:
>I was thinking of getting a Nikon badass camera like both Daves, but reality bit, and this Canon PowerShot kicks *** (butt will never kiss one )!
>Swifty was dirty... quite dirty because of the cinder dust on our roads.
>it's at sunset, but not a feature.
>poor Dave B., I'm sorry I kicked your butt so well. I'm going to enjoy it as long as possible.
>poor speednut, he advised me about getting a kickass camera, was really helpful, and he spent so much time Photochomping his entry.
>As an award winning model car builder, this alledged kit was too easy to build, and is the only diecast I have ever built. Yes, I modded it with Bare metal foil on the door handles and exhaust tip, straight pin gear ****, paint detailed interior, and ground off the screw thingys off the bottom. And it wins this!
Thanks again to all who voted. Those who did for me, checks are in the mail.
#15
#16
#17
#23