You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
1 - 4.5" Wood's vacuum cup w/ 5/8" spud
1 - 6" Wood's vacuum cup w/ 5/8" spud
3 - Matthews mini grip heads
2 - 3/8" x 20" stainless rods
1 - 5/8 spud
1 - Bogen Manfrotto Camera Bracket 143BKT
1 - Bogen Manfrotto 3025 3-D head
Thanks Tsukiji for all the extra info!
I like the idea for the dual parallel rods since I've found a lot of flex in the rear quarter panel there. You've given me some new ideas.
__________________
For every ounce of gas saved by a Toyota Pious, a gallon is wasted by the 20 cars behind it desperately attempting to pass because the typical Pious is driven by what appears to be a stoned, nearsighted geriatric who's also lost and confused and allergic to g-forces higher than .01 just to gain an extra 2 MPG. (paraphrased)
Any have experience using the headrest mounting or similar to the roll bars on a convertible? Looks like it should work as well or better, and not have the drawbacks of mounting to the headrest.
