You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
i had a link of a tool you use in car to take motion shot from the inside of the car.. the tool was like a rig to be connected between both head rest and put the camera in the middle... some one gave me the link ... but i dont know where is it... the tool was starting from $40..
Hey, I recognize that first photo!
Take a look in my NAM gallery for more info on the DIY mount I used. I've also used the same Filmtools.com suction cup mount that Jim showed and it holds very well.
__________________
For every ounce of gas saved by a Toyota Pious, a gallon is wasted by the 20 cars behind it desperately attempting to pass because the typical Pious is driven by what appears to be a stoned, nearsighted geriatric who's also lost and confused and allergic to g-forces higher than .01 just to gain an extra 2 MPG. (paraphrased)
Do your cameras all have remotes or are you setting the timer, reaching over, hitting the button and then waiting for the camera's timer to take the picture?
Do your cameras all have remotes or are you setting the timer, reaching over, hitting the button and then waiting for the camera's timer to take the picture?
Was using an old school cable release and forgot to set the 2 sec. timer. I'm using an infrared remote now and it's much easier to use.
__________________
For every ounce of gas saved by a Toyota Pious, a gallon is wasted by the 20 cars behind it desperately attempting to pass because the typical Pious is driven by what appears to be a stoned, nearsighted geriatric who's also lost and confused and allergic to g-forces higher than .01 just to gain an extra 2 MPG. (paraphrased)