You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Am looking to perform some upgrades to my 05' S that may be out of my comfort level (pulley, front sway bar, coil overs, etc). I've always been hesitant about bringing the car to just any place because of peoples unfamiliarity with the MC, so I thought I'd check on here for some opinions. I live in Nashua so someplace 'local' would be nice.. but any and all opnions will be greatly appreciated.
Tnx.
Jeremy
__________________
'05 R53 Pepper White, 16x7 Gram Lights 57Maximum, RMW Tuned, Schrick Cam, 15% Pulley, 440 Injectors, NGK Plugs, MM V2 Exhaust, MM Header, MM Engine Bushings, MM Front Control Arm Bushings, MM CAI, BC BR Coilovers, MM Lower Strut Brace, OMP Lower Stress Bar, OMP Upper Stress Bar, Hotchkis Rear Sway Bar, Carbotech XP8 Pads, Powerslot Slotted Rotors, MSD Coil, MSD Cables, OM Tow Hitch, MM Oil Catch Can, Schroth Harness, Full 50% Cross Weight Alignment... and a Big Stripe
Last edited by chorline; 04-06-2008 at 08:24 AM.
Reason: ?
Thanks for reply guys. When the time comes I have some people to call. Thanks again!
__________________
'05 R53 Pepper White, 16x7 Gram Lights 57Maximum, RMW Tuned, Schrick Cam, 15% Pulley, 440 Injectors, NGK Plugs, MM V2 Exhaust, MM Header, MM Engine Bushings, MM Front Control Arm Bushings, MM CAI, BC BR Coilovers, MM Lower Strut Brace, OMP Lower Stress Bar, OMP Upper Stress Bar, Hotchkis Rear Sway Bar, Carbotech XP8 Pads, Powerslot Slotted Rotors, MSD Coil, MSD Cables, OM Tow Hitch, MM Oil Catch Can, Schroth Harness, Full 50% Cross Weight Alignment... and a Big Stripe
I just noticed this post and you've probably already had work done but I wanted to recommend Concord Motorsports for the future. It is probably a decent drive north for you, but I had a friend that recently had an ECU tune there and was very happy with the service.
thanks so much. I actually purchased my Mini up there back in August of 2007 and just last week had the pulley installed up there as well. Was only about a 45 min ride but ended up going with them after all the help and guidence they gave over the phone when I was going through my spark plug 'pop-out' issue. After I performed the Heli-Coil with their recommendation I had them do my pulley last week and couldn't be happier. Thanks for confirming that they are a great shop. cheers
__________________
'05 R53 Pepper White, 16x7 Gram Lights 57Maximum, RMW Tuned, Schrick Cam, 15% Pulley, 440 Injectors, NGK Plugs, MM V2 Exhaust, MM Header, MM Engine Bushings, MM Front Control Arm Bushings, MM CAI, BC BR Coilovers, MM Lower Strut Brace, OMP Lower Stress Bar, OMP Upper Stress Bar, Hotchkis Rear Sway Bar, Carbotech XP8 Pads, Powerslot Slotted Rotors, MSD Coil, MSD Cables, OM Tow Hitch, MM Oil Catch Can, Schroth Harness, Full 50% Cross Weight Alignment... and a Big Stripe
I know you've already gotten your work done, but I'd just like to add a recommendation for Dent Sport Garage in Norwood, MA. They're pretty far south from you but they are a fantastic shop with plenty of MINI and mini experience.
[up next: alta 19mm rear sway bar, fmic, ECU]
