JCW JCW Aftermarket Wheels
#126
SSR and Volk make some really nice wheels for the f5x cars. If I garage the f55 next fall instead of trading it which I did with my last mini, BBS Lm,CCW,SSR or Volk will replace the BBS sr016 and build will be complete until a plug and play big turbo conversion is proven and available.
Here is the next A1A cruiser
Plan to get a cpo 550i for the daily grind across the bridges to the mainland. If I can find a alpina b6 cpo for under 70k I may go that direction
Here is the next A1A cruiser
Plan to get a cpo 550i for the daily grind across the bridges to the mainland. If I can find a alpina b6 cpo for under 70k I may go that direction
Last edited by F55MidnightBlackCooperS; 11-18-2015 at 04:03 PM.
#136
#137
#140
Looks good in black, kind of Aston Martin looking. .
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#142
Al - You just have to be really careful with an 8" wheel and 215 tires and curb rash. Those tires on a 7" wheel will overhang enough to protect the rims somewhat from the curb...but on those rims I would guess they will be almost flush. Look amazing - try to keep them that way!
The 7" x 17" rims that came with my JCW (track spoke) bend out so much they a nickname "rash rims" by the guys at the dealership. I'm super careful, run 215's and I've scraped one in the first 1,000 miles.
The 7" x 17" rims that came with my JCW (track spoke) bend out so much they a nickname "rash rims" by the guys at the dealership. I'm super careful, run 215's and I've scraped one in the first 1,000 miles.
#143
Al - You just have to be really careful with an 8" wheel and 215 tires and curb rash. Those tires on a 7" wheel will overhang enough to protect the rims somewhat from the curb...but on those rims I would guess they will be almost flush. Look amazing - try to keep them that way!
The 7" x 17" rims that came with my JCW (track spoke) bend out so much they a nickname "rash rims" by the guys at the dealership. I'm super careful, run 215's and I've scraped one in the first 1,000 miles.
The 7" x 17" rims that came with my JCW (track spoke) bend out so much they a nickname "rash rims" by the guys at the dealership. I'm super careful, run 215's and I've scraped one in the first 1,000 miles.
my BBS rc 326 wheels are 17 x 7.5 ET 43, so work well with the 215/45/17
Goodyear Eagle F1 Asymmetric 2 87Y
(after custom machining the c/b to suit and then adding radius washers )
Your correct in that The spokes do bend out a little but not as much as the official mini ones,
Last edited by blue al; 12-01-2015 at 05:34 PM. Reason: Added pic
#144
I'm totally convinced at this point that MINI didn't design the wheels for the F56 JCW until the rest of the car was designed. It's kind of obvious that there is just "no give" when it comes to fender & strut clearance, and clearing the Brembos!
The nice thing is the stock wheels are really tight up to the Brembos with minimal clearance and it DOES look sweet in stock form!
The overall look of the F56 is just better with the larger diameter wheels and wider tires. So, therein lies the dilemma many of us have. Leave well enough alone or spend a fortune through trial & error fitments?
Kudos to those of you who are leading the way trying different wheel & tire combinations!
John
The nice thing is the stock wheels are really tight up to the Brembos with minimal clearance and it DOES look sweet in stock form!
The overall look of the F56 is just better with the larger diameter wheels and wider tires. So, therein lies the dilemma many of us have. Leave well enough alone or spend a fortune through trial & error fitments?
Kudos to those of you who are leading the way trying different wheel & tire combinations!
John
#146
#147
#148
How do you like those tires? I put a set on mine after about 200 miles on the Hankook run flats. Big improvement. I'm still looking for a set of reasonably priced wheels that I like.
#149
The Profil 10's is all he quoted me....I guess they are a bit different. The Lap Motorsports MINI wheels are likely custom made for their race cars, and the Profil 10 is the closest thing....I think they look very similar though:
http://www.fikse.com/wheels/profil/