You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
__________________
2009 R56 PW/PW "Jeremy"...6 Speed, Sport, Cold, Hi-Fi, Piano Black, Stubby Antenna, Alta Intake, Alta Hot Side Boost Tube, Functional hood Scoop, Alta Exhaust, Alta Rear Endlinks, Scangauge II, Cooper Side Scuttles, 22mm Alta Rear Sway Bar, KW Variant 1 Coilovers, CravenSpeed Adjustable Short Shifter, NM-Engineering Torque Arm Insert, S.P.E.C. Stage 2.5 Clutch and Pressure Plate.
Check the marketplace often, they usually have a few here and there. btw this is 2nd gen (though i understand its just a sourcing issue, so guess it works lol)
__________________
2006 MCS PW/B, 15% pulley, JCW CAI, 22mm Alta rear sway bar, original owner---www.SooperCooperinfo.com-a very complete MINI aftermarket/DIY/information library
Check the marketplace often, they usually have a few here and there. btw this is 2nd gen (though i understand its just a sourcing issue, so guess it works lol)
1st and 2nd Gen mats are cut a bit differently. The 1st Gen drivers side mats are a bit larger and don't fit in the foot well properly on 2nd Gens. The passenger sides seem to fit ok though.
1st and 2nd Gen mats are cut a bit differently. The 1st Gen drivers side mats are a bit larger and don't fit in the foot well properly on 2nd Gens. The passenger sides seem to fit ok though.
Then he should probably stick to the 1st gen marketplace =p
