You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I just got quoted $250 for 35% 3M window tint for my MCS. No sunroof. Just the front/back windows and rear windshield. Am I crazy or is that a little high?
The only other car I had tinted windows on came with them so I'm really unsure as to what's a fair price.
Well then I will not go with them. Seems like they are a little high. He was quoting me well over 1000.00 to do the full nose clear bra too. Said he was gonna have to take off the emblem, headlight rings, bonnet stripes, fenders, etc...
All depends on area you live, tint prices vary very much based on location.
__________________
2008 BRG/W MCS (retired 4/22/11)
2011 LW/B MCS CM ALL4 Ordered 3/5, Born 3/17, Bremerhaven 3/24, Loaded on the Faust 3/30, Port Newark 4/14, Delivered 4/22
2011 Mazda3 s Sport
i tinted mine with 35% 3M front back rear and sunroof for around 100 dlls (1300pesos)
seemd kinda pricey to me at the time, but you guys pay alot more
__________________ 2008 MCS, Hot Chili, DS/DS, Black lines, Rally Lights relayed to fog lights, ALTA CAI / Boost Tubes / TURBOback exhaust, BlackedOUT, blacked out Flame spoke rims (1st?)... Future mods: Joey mod, meth/water sprayer, ECU (whenever alta decides its time!)
I paid that for my maxima back in 2002 that was for all windows and the sunroof. Don't know what my mini's was since the dealer did it before I picked it up.
__________________ 08' MCS, PW/BLK, 17" Web Spoke, CWP, Rear fogs, White turns, AutoTran, NAV, All Packages, Xenons, Brushed Alum, Carbon Lounge, Cream
I agree with JudgeS. A lot depends on the area you live in. But, $250 sounds really high. You want to make sure they use a quality tint and see what kind of guarantee they put on their work. The place that did mine guarantees his job for as long as I own the car..
__________________ Baby '07 MCS | Chili Red | White Roof l Checkered Mirrors | White Bonnet Stripes | White Turn Signals | Driving Lamps | Fog Lights Front & Rear | Cold Weather Package | Sports Package | Convenience Package | Automatic AC / Automatic Transmission | Chrome Line Interior | Craven Speed Stubby Antenna
I really hate how there is a "ring" around the tint where the little, round black circles are on the borders of each window. Is there a way to avoid or get rid of it?
__________________
*Cyndi* 2003 Chili Red/White Top MCS
Pioneer DEH-P710BT with MFSW controls, Magnacor Wires, Brisk Silver Plugs, Optima Red Top 34R Battery, Pioneer TS-G1643R Speakers, Goodyear Eagle F1 All Season Tires (215/45ZR17), K&N Filtercharger, B&M Short Shift Kit, Detroit Tuned Bypass Valve,Koni FSD,Cravenspeed Under Tower Indurators,Powerflex Lower Control Arm Bushings Coming Soon: M7 Strut Tower Bar Motoring since 3/26/2010...
35/20% 3M tint on windows + 20% on the sunroofs for $265. The same shop did my Subaru and did a great job. They are also the shop that does the after market tints for the new car dealerships in the city.
Is it a "factory tint" job, where they go ALL the way to the edges of the window, or a cheaper tint job where there's a gap between the tint and the edge of the window. That extra 1/8" is expensive.
I did 35% Formula One Pinnacle Series all the way around. The reasons that I chose it over cheaper places are that it had 60+% Heat Rejection, UV protection, and a lifetime nation-wide warranty. So if my tint ever gets screwed up, no matter where I live in the US, all I have to do is go to a shop that carries Formula One and they will repair/replace it for free. Total it was about $340.
__________________
2009 MC HzB/W|Born 4.28.2009|Home 6.02.2009|Automatic|Xenon|Sport Seats|MFSW|iPod| Hook 'Em Horns! Christian Mini Motoring Society
Last edited by lacynpiper; 04-20-2010 at 09:58 PM.
Is it a "factory tint" job, where they go ALL the way to the edges of the window, or a cheaper tint job where there's a gap between the tint and the edge of the window. That extra 1/8" is expensive.
Lifetime warranty here and tint that goes to the edge
I really hate how there is a "ring" around the tint where the little, round black circles are on the borders of each window. Is there a way to avoid or get rid of it?
If it's like mine where the water kept the film away from the glass when they installed it, you should be able to just push it out with your finger. Or take it back to where you got it tinted and have them heatgun it and smoosh it back down.
@ OP - mine was ~$300 for 55% Matico Charcool on the sides, back and sunroofs.
__________________ R56 PW/B usta car-R53 RG/S
If it's on the configurator, IT'S NOT A "MOD"!!!
"I'm not advocating violence, I'm just saying it works and I highly suggest using it."- (ask a) Ninja
Is it a "factory tint" job, where they go ALL the way to the edges of the window, or a cheaper tint job where there's a gap between the tint and the edge of the window. That extra 1/8" is expensive.
The glass is actually smoked with a "factory tint". It's not a film. (Well, a film is probably bonded between the layers of glass at the factory.)
The guy who did mine basically took it all the way to the edge, but there's still an ever so slight fraction of an inch back from the edge to keep it from peeling back.