Interior/Exterior R53 M7 Challenge Wing
#176
I was able to take some snap shots of one of our customers cars this past weekend and thought you may like some different views. This is the first production piece and the pipe line is slowly filing as we speak .He is putting the front splitter on later this week and I will try to grab some shots of that shortly . Visually it will be the same for the R-53 as it is on this R-56. The angle of the shots makes it appear larger than those originally shown but they are actually identical to the unit on the yellow R-56 shown earlier in the thread. Again let me say it is certainly not for everyone , only those that requested it
Randy
M7 Tuning
Randy
M7 Tuning
#178
The end plates are powder coated and of course could be re done by the buyers to their specs.
Randy
M7 tuning
#179
#181
Hey TRAK....Buddy...I finally have someone who is going to build me my moonroof replacement. The composite guys from work are going to do a 4-layer aviation-grade CF panel with a honeycomb center...secured down with aviation-grade cam locks...shhhhhh.....I might have them make u one... They said they will definitely do mine and if there is a market for it they will do others. They also said I could give them parts to mold and they will turn out whatever.....Cooper gas covers.....whatever....
#182
#185
#186
Randy
M7 Tuning
http://www.m7tuning.com/parts/produc...roducts_id=139
#187
C-Wing Update - Development Change ?
Any updates for us on your C-Wing Randy ?
Looks like instead of the base model having an upper aluminum plate, it is made of fiberglass now
Must be lighter ?
http://www.m7tuning.com/parts/produc...roducts_id=141
#188
Attachment 48924
Any updates for us on your C-Wing Randy ?
Looks like instead of the base model having an upper aluminum plate, it is made of fiberglass now
Must be lighter ?
http://www.m7tuning.com/parts/produc...roducts_id=141
Any updates for us on your C-Wing Randy ?
Looks like instead of the base model having an upper aluminum plate, it is made of fiberglass now
Must be lighter ?
http://www.m7tuning.com/parts/produc...roducts_id=141
For the foreseeable future that will be the case , fiberglass rather than aluminum.
Randy
M7 Tuning
#189
One for a clubman?
Could you make one of there spoilers for a clubman?
We are much closer to being able to deliver our R53 versiion of the challenge wing so I thought I would start up a seperate thread here. We have been discussing it for a few weeks now over in the R-56 section as that was the first version we completed but as we come nearer to actually have the item for the R-53 it will be best to cover it here. We should be able to deliver the first pieces in 4 to 6 weeks . We will have both fibreglass / aluminum versions as well as the upgraded carbon fiber pieces so a varitey of price points will be covered. Pricing will be posted as soon as it is available. These pictures are of the prototype pieces being test fit yesterday. The next step is the mold maker and then on to production. I will post updates as they become available .
Randy
M7 Tuning
Randy
M7 Tuning
Thread
Thread Starter
Forum
Replies
Last Post
BRracing
MINIs & Minis for Sale
18
12-22-2015 09:25 AM