You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
With the stock wheels, 215/40 tires, and the 15mm spacers; I get a little rubbing in the rear. It only rubs when the rear suspension is compressed and just rubs on the plastic wheel well liner. It has not caused any tire damage, just a little rub mark on the tires.
__________________
2006 MCS JCW GP #1405: Adj Front Camber Plates, 19mm Rear Sway Bar, MM Front Lower Brace, Milltek Cat-Back, TCE 13" Front/11.75" Rear BBK, 15mm Spacers, Wheel Studs, JCM Modified Intake, MM Filter, Gauges
Here is a NAM link where I had previously posted some pictures. http://www.northamericanmotoring.com...-question.html
I run about -2.0 degrees of camber in the front and about -1.5 in the rear. Thus that tilts the front tire in a little more than stock in the front but there is plenty of room in the front.
__________________
2006 MCS JCW GP #1405: Adj Front Camber Plates, 19mm Rear Sway Bar, MM Front Lower Brace, Milltek Cat-Back, TCE 13" Front/11.75" Rear BBK, 15mm Spacers, Wheel Studs, JCM Modified Intake, MM Filter, Gauges
