Electrical Fiamm Air Horns

Thread Tools
 
Search this Thread
 
  #1  
Old 10-30-2016, 05:18 PM
gearhead60's Avatar
gearhead60
gearhead60 is offline
4th Gear
Thread Starter
Join Date: Oct 2016
Location: Manassas, VA where the Civil War resides.....
Posts: 405
Received 89 Likes on 67 Posts
Fiamm Air Horns

I'm getting a 2017 ALL4 Clubman S. I plan on transplanting a set of Fiamm air horns into the Clubby from my present car. Anyone have any experience installing aftermarket horns on a Gen 3 mini?
 
  #2  
Old 04-24-2017, 02:44 PM
biggerbob's Avatar
biggerbob
biggerbob is offline
Neutral
Join Date: Apr 2017
Location: Carson Valley NV
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Looking to change out the horns also. I like the loudness and sound of the Nautilus Stebel horns. They are small sized and nice and loud. +138dB
 
  #3  
Old 02-24-2018, 03:58 PM
theblackfalcon's Avatar
theblackfalcon
theblackfalcon is offline
2nd Gear
Join Date: Jan 2011
Posts: 85
Likes: 0
Received 3 Likes on 2 Posts
I have them with a relay controlled off the existing horn. I.e. I have both. I installed on the JCW inside the left hand side washer fluid cavity. Fits nicely.
 
The following users liked this post:
bratling (07-26-2018)
  #4  
Old 02-24-2018, 04:14 PM
gearhead60's Avatar
gearhead60
gearhead60 is offline
4th Gear
Thread Starter
Join Date: Oct 2016
Location: Manassas, VA where the Civil War resides.....
Posts: 405
Received 89 Likes on 67 Posts
I ended up using the existing horn circuit also, but mounted them behind the front bumper support. Tight fit, but they sound good....
 
The following users liked this post:
bratling (07-26-2018)
  #5  
Old 02-24-2018, 04:37 PM
theblackfalcon's Avatar
theblackfalcon
theblackfalcon is offline
2nd Gear
Join Date: Jan 2011
Posts: 85
Likes: 0
Received 3 Likes on 2 Posts
That's where I started. But I added a light bar and had to move them.
 




All times are GMT -7. The time now is 05:34 PM.